Korena
Product detailSKU #1366044064174

JBLJRX215 15" 2-Way Passive Loudspeaker System With 1,000W Peak Power Handling

JBL logo
JBL JRX215 15" 2-Way Passive Loudspeaker System With 1,000W Peak Power Handling
1/3

Independent shopping perspective

The Korena take

JRX215 is a 15-inch, two-way passive PA loudspeaker for live music, DJ sets, and speech reinforcement. Its 8-ohm design is matched to an amplifier rated from 250 to 500 watts into 8 ohms, and it carries a 250 W/1,000 W power rating. A 15-inch low-frequency driver and 1-inch polymer compression driver cover a stated 90° by 50° dispersion pattern. Speakon and 1/4-inch parallel inputs, plus selectable pole angles, support straightforward system deployment.

JBL JRX215 15" 2-Way Passive Loudspeaker System With 1,000W Peak Power Handling product detail
Product studyJBL JRX215 15" 2-Way Passive Loudspeaker System With 1,000W Peak Power Handling
JBL JRX215 15" 2-Way Passive Loudspeaker System With 1,000W Peak Power Handling alternate view
Alternate view

Strong match

Who this is for

  • Live music, DJ, or speech reinforcement with a 250–500 W amplifier into 8 ohms.
  • Speaker deployments that need a 0° or 10° pole-mounted angle.
  • PA setups using Speakon NL-4 or 1/4-inch TS speaker connections.

Consider the trade-offs

When to look elsewhere

  • Systems that need a powered loudspeaker rather than a passive speaker.
  • Amplifiers outside the stated 250–500 W recommendation into 8 ohms.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

90° × 50° nominal dispersion

Sets the stated horizontal and vertical coverage angles.

Detail 02

50 Hz–12.5 kHz frequency response (±3 dB)

States the measured response range at the ±3 dB specification.

Detail 03

61 lb

Factor this weight into transport and speaker-placement planning.

Detail 04

27.5 × 18.1 × 17 in.

Use these dimensions when planning storage or transport space.

Final check

Know before you order

  1. 01Provide an amplifier rated 250–500 W into 8 ohms.
  2. 02Choose a Speakon NL-4 or 1/4-inch TS speaker connection for the input.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Is the JRX215 powered?

No. It is a passive two-way PA loudspeaker.

02What amplifier power is recommended?

JBL recommends 250 to 500 watts into 8 ohms.

03Can it be pole mounted at an angle?

Yes. Its 1.41-inch pole socket offers 0° and 10° tilt settings.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

7 detailsSound
Low Frequency Driver
JBL M115-8A
Sensitivity 1m
98dB SPL (1w/1m)
Nominal Impedance
8 ohms
Frequency Response 3db
50Hz–12.5kHz
Crossover Frequency
1.6kHz
High Frequency Driver
JBL 2414H-C 25 mm (1 inch) polymer diaphragm compression driver mounted on Progressive Transition Waveguide
Frequency Range 10db
38Hz–16kHz
3 detailsConnections & power
Power Rating
250W/1000W
Input Connectors
Neutrik Speakon NL-4 (x1); .25 inch TS phone jack (x1); parallel
Recommended Amplifier Power
250W to 500W into 8 ohms
1 detailsSize & weight
Weight
61
3 detailsOther
Hxwxd
27.5 inchx18.1 inchx17 inch
Nominal Dispersion
90º x 50º
Maximum SPL
128dB

Complete your setup

Worth comparing

More from JBL