Detail 01
100° x 15° coverage
Wide side to side, very tight top to bottom. One box covers a narrow slice; you add boxes to grow vertical coverage.
Product detailSKU #1274034480951
JBLVRX932LAP 12" 2-Way Active Line Array
1/8
Independent shopping perspective
The Korena take
Powered 12-inch line array element with amps and DSP built in. For production companies and venues flying or stacking multiples on mid-size shows.
Strong match
Who this is for
- Flying or stacking multiple boxes for long, narrow throw
- Speech and music where tight vertical coverage keeps sound off ceilings
- Single-box pole-mounted use on smaller corporate gigs
Consider the trade-offs
When to look elsewhere
- A solo DJ or band wanting one simple top box
- Full-range playback on its own; output drops below 75Hz
- Crews watching weight — 52 lb each before rigging hardware
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Three 1.5-inch HF drivers
Splitting the high end across three drivers keeps the horizontal pattern even and lets boxes couple cleanly when arrayed.
Detail 03
Onboard Class-D amp and DSP
Crossover, limiting and array shaping live inside the box. No amp rack or outboard processor to carry and patch.
Detail 04
powerCon in and loop-through, XLR loop-through
Power and signal daisy-chain box to box, so a hang takes one feed instead of a separate run per cabinet.
Detail 05
Input attenuator, 0 to 16dB
Trim level at the box itself — useful when a down-fill needs to sit quieter than the main hang.
Detail 06
11-ply birch plywood enclosure
Plywood walls are stiffer and less resonant than molded plastic, at the cost of more weight for the same size.
Final check
Know before you order
- 01The VRX-AF suspension frame is sold separately and required for flying
- 02Plan on subwoofers; useful output stops in the mid-70Hz range
- 03Flying needs the 10mm forged eyebolts plus a qualified rigger's sign-off
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many boxes do I need?
One works pole-mounted for a small room. Arraying starts paying off at two to four boxes, where the 15-degree vertical patterns stack into coverage that reaches the back.
02Does it need a separate amp or processor?
No. Amplification and DSP are inside the cabinet. You feed it line-level XLR and AC power, and both loop through to the next box in the hang.
03Can I fly it without the array frame?
Not properly. The VRX-AF frame is the intended suspension hardware and is sold separately. Without it you're limited to pole mounting or ground stacking.
04Will it run on 240V power overseas?
Yes. It accepts 90–132 VAC or 216–264 VAC at 50/60Hz, drawing about 3A per system at 240V. You'll need the right powerCon cable for the region.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance)
- LF: 750W, HF: 125W
1 detailsBody & build
- Color Finish
- Black DuraFlex finish
27 detailsOther
- Power Rating
- 1750W peak, 875W continuous
- AC Loop Through Connector
- Neutrik powerCon (NAC 3MPB)
- Frequency Range
- 57Hz–20kHz, (–10dB)
- LF Driver
- 1 x JBL 2262FF 305 mm (12") neodymium magnet
- AC Power Operating Range
- 90–132 VAC or 216–264 VAC, 50/60Hz
- Autio Input Connector
- XLR with loop through
- Enclosure
- 25/15 mm, 11-ply birch plywood
- Tier
- new
- Coverage Pattern
- 100 x 15 nominal
- Frequency Response
- 75Hz–20Hz, (+/-3dB)
- Finish
- Black DuraFlex finish
- Category Source
- detail
- (HxWxD)
- 349 mm x 597 mm x 444 mm, (13.75" x 23.5" x 17.5")
- DPC-2 Output Sectoin
- LF: Dual-Bridged Technology, Class-D
- Korena Special
- false
- AC Current Requirements
- 6A per system at 120V, 3A per system at 240V
- AC Input Connector
- Neutrik powerCon (NAC 3MPA)
- HF Driver
- 3 x JBL 2408J, 38 mm (1.5")
- User Controls
- Input Attenuator (0–16dB)
- Signal Processings
- DSP based, resident in Input Module
- Grille
- Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Suspension/Mounting
- Optional VRX-AF line array frame kit, 10 mm forged eyebolts or internal dual-angle 36 mm pole mount cup for pole or tripod mounting
- Source Id
- site51274034480951
- Prop65
- WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
- Net Weight
- 24 kg (52 lb.)
- Maximum Peak Output
- 136dB SPL at 1m
- Optional Accessories
- VRX-AF: Suspension array frame (sold separately)
Complete your setup
Worth comparing
1 of 12
More from JBL
1 of 8
