Detail 01
RTA mic input with +15V DC phantom power
The processor provides a dedicated RTA mic input for its AutoEQ workflow.
Product detailSKU #1379945713612
dbxDriveRack PA2 Speaker Management System
1/4
Independent shopping perspective
The Korena take
DriveRack PA2 sits between a mixer and amplifiers, bringing together the processing used to configure and protect a live PA system. Its two line inputs and six line outputs support full-range, 2-way, and 3-way arrangements with crossover capability, output EQ, limiting, and driver-alignment delay. Setup Wizards guide level balancing, automatic EQ, feedback suppression, and speaker tunings. Ethernet control lets you adjust functions remotely from a mobile device or laptop. With an RTA mic, AutoEQ sets speaker levels and room EQ in seconds.
Strong match
Who this is for
- Preparing a live PA system with Wizard-guided level balancing, equalization, and speaker tuning.
- Controlling PA processing remotely from a mobile device or laptop over Ethernet.
- Running full-range, 2-way, or 3-way speaker systems with crossover support included.
Consider the trade-offs
When to look elsewhere
- Systems that cannot use its two line inputs and six line outputs.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
10 ms alignment delay per channel, 60 ms total
Provides the stated delay range for driver alignment across channels.
Detail 03
Two female XLR line inputs; six male XLR outputs
Defines the line-level input and output connector types for system routing.
Final check
Know before you order
- 01Plan for an RTA mic if you want to use AutoEQ for speaker-level and room-EQ setup.
- 02Use Ethernet when remote control from a mobile device or laptop is required.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What does AutoEQ do?
With an RTA mic, it sets speaker levels and room EQ in seconds.
02Can the PA2 help manage feedback?
Yes. It includes Advanced Feedback Suppression, which listens for and anticipates feedback before making adjustments.
03How can it be controlled remotely?
Connect it by Ethernet to access and control its functions from a mobile device or laptop.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20kHz, +/- 0.5dB
2 detailsPickups & controls
- Mic Preamp Phantom Power
- +15VDC (RTA)
- Mic Preamp Equivalent Input Noise Ein
- < -117dB, 22Hz–22kHz, 150 ohm (RTA)
11 detailsConnections & power
- Output Connectors
- Male XLR
- Output
- Six Line Outputs
- Input Impedance
- >50 kohm
- Output Impedance
- 120 ohm
- Output Type
- Electronically balanced, RF filtered
- Power Consumption
- 22W
- Input Type
- Electronically balanced/RF filtered
- Input
- 2 line inputs, 1 RTA Mic input
- Operating Voltage
- 100–120VAC 50/60Hz - EU: 220–240 VAC 50/60Hz
- Input Connectors
- 2 Female XLR line inputs, 1 Female XLR RTA Mic input
- Max Output
- +20dBu
4 detailsSize & weight
- Dimensions Hxdxw
- 1.75 inch x 5.75 inch x 19 inch, 4.4 cm x 14.6 cm x 48.26 cm
- Weight
- 5.25
- Shipping Weight
- 6.75 lb. (3.1 kg)
- Unit Weight
- 5.25 lb. (2.4 kg)
10 detailsOther
- Thd Noise
- 0.003% typical at +4dBu, 1kHz, 0dB input gain
- Cmrr
- > 45dB
- D A Dynamic Range
- 112dB A-weighted, 110dB unweighted
- Type Iv Dynamic Range
- 123dB with transient material, A-weighted, 22kHz BW; 121dB with transient material, unweighted, 22kHz BW; 115dB typical with program material, A-weighted, 22kHz BW
- A D Dynamic Range
- 112dB A-weighted, 110dB unweighted
- Interchannel Crosstalk
- < -110dB, -120dB typical (input-to-output: < -100dB)
- Dynamic Range
- >110dB A-weighted, >107dB unweighted
- Alignment Delay
- 10ms per channel (60ms total)
- Sample Rate
- 48kHz
- A D Converter
- dbx Type IV Conversion System
