Korena
Product detailSKU #1430749400170

CrownXLS2502 775W Power Amp With Onboard DSP

Crown
Sale
Crown XLS2502 775W Power Amp With Onboard DSP
1/8

Independent shopping perspective

The Korena take

The XLS2502 is a high-output Crown power amplifier for systems that need flexible load options and DSP control at the amp. It delivers 775W per channel at 4 ohms or 2,400W at 4 ohms bridged, and it can operate stereo into 2-, 4-, or 8-ohm loads. Per-channel high-pass, low-pass, and band-pass filters support crossover and EQ work, with the enlarged LCD providing parameter monitoring. The 8.6 lb., convection-cooled chassis avoids fan noise while remaining easy to move.

Crown XLS2502 775W Power Amp With Onboard DSP product detail
Product studyCrown XLS2502 775W Power Amp With Onboard DSP
Crown XLS2502 775W Power Amp With Onboard DSP alternate view
Alternate view

Strong match

Who this is for

  • PA systems needing 775W per channel into 4-ohm loads.
  • Bridged-mono systems configured for 4- or 8-ohm operation.
  • Speaker setups requiring per-channel high-pass, low-pass, or band-pass filtering.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Crown XLS2502 775W Power Amp With Onboard DSP construction detail

Detail 01

775W per channel at 4 ohms

Provides the listed dual-channel output at a 4-ohm load.

Detail 02

2,400W at 4 ohms bridged

Provides the listed output in a 4-ohm bridged-mono configuration.

Detail 03

2-, 4-, and 8-ohm stereo operation

Allows the amplifier to be configured for those listed stereo load impedances.

Detail 04

Per-channel high-pass, low-pass, and band-pass filters

Lets you set the listed filter types independently for each channel.

Detail 05

Convection cooling

The design operates without cooling fans.

Final check

Know before you order

  1. 01Verify both speaker impedance and whether your system requires stereo or bridged-mono wiring.
  2. 02For centralized HiQnet monitoring and control, the optional RJ-45 network card is required.
Crown XLS2502 775W Power Amp With Onboard DSP close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the XLS2502 be used in bridged mono?

Yes. It bridges for 4- or 8-ohm mono use and is rated at 2,400W into 4 ohms bridged.

02Are the DSP filters available on both channels?

Yes. High-pass, low-pass, and band-pass filters are available on each channel.

03Does it use cooling fans?

No. The amplifier uses convection cooling.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51430749400170

Worth comparing

More from Crown