Detail 01
DSP filters to 3,000 Hz at 24 dB/octave
High-pass, low-pass, and band-pass filtering are available from the amplifier.
Product detailSKU #1430749400152
CrownXLS1002 2-Channel 350W Power Amplifier With Onboard DSP
Sale
1/3
Independent shopping perspective
The Korena take
Crown’s XLS1002 is a two-channel power amplifier with onboard DSP and a front-panel LCD/menu system for adjusting input sensitivity and amplifier modes. Its DSP includes high-pass, low-pass, and band-pass filters up to 3,000 Hz at 24 dB per octave. XLR, 1/4-inch TRS, and RCA inputs accommodate balanced or unbalanced sources. Rear connections include 1/4-inch line-level outputs, speakON outputs, and binding posts, while front level controls and clip indicators keep monitoring and adjustment within reach.
Strong match
Who this is for
- Connecting balanced or unbalanced signals from consoles, wireless systems, or playback devices.
- Adjusting input sensitivity, amplifier modes, and DSP filters from the front-panel display.
- Driving speakers in a live-performance or installed sound setup.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4-ohm dual: 350W; 8-ohm bridged: 700W; 4-ohm bridged: 1,100W
The listed power ratings vary with the selected dual or bridged configuration and impedance.
Detail 03
Circuit breaker
It provides overload protection for connected components.
Final check
Know before you order
- 01Confirm the required impedance, output rating, and whether your setup calls for dual-channel or bridged operation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What input connections does the XLS1002 accept?
It accepts XLR, 1/4-inch TRS, and RCA inputs for balanced or unbalanced signals.
02What DSP filters are available?
It offers high-pass, low-pass, and band-pass filters up to 3,000 Hz with a 24 dB-per-octave slope.
03Is the XLS1002 bridgeable?
Yes. Its design supports bridged operation, with listed ratings of 700W at 8 ohms and 1,100W at 4 ohms.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response
- +0dB, -1dB
- Sensitivity
- 1.4Vrms
2 detailsBody & build
- 8 Ohm Bridged
- 700W
- 4 Ohm Bridged
- 1,100W
2 detailsSize & weight
- Weight
- 8.6
- Dimensions
- 19 inch (48.3 cm) x 3.5 inch (8.9 cm) x 7.7 inch (19.6 cm)
8 detailsOther
- 8 Ohm Dual
- 215W
- 2 Ohm Dual
- 550W
- Damping Factor
- > 200
- Thd
- < 0.5%
- Intermodulation Distortion
- < 0.3%
- Crosstalk
- At 1kHz: > 85dB, At 20kHz: > 55dB
- Signal to Noise
- > 97dB (at .775Vrms sensitivity, 6dB lower)
- 4 Ohm Dual
- 350W
