Detail 01
Selectable input sensitivity: 0.775V or 1.4V
Lets the amplifier be matched to high- or low-output mixers and other sources.
Product detailSKU #1500000315937
CrownXLi 3500 Power Amplifier
1/2
Independent shopping perspective
The Korena take
Crown’s XLi 3500 is a power amplifier for live sound, DJ systems, and installed setups. RCA and XLR inputs let it accept different source connections, while Speakon and binding-post outputs provide two ways to connect passive speakers. Each channel has its own level control and status LEDs, making it easier to monitor signal, clipping, power, and faults during a set. Forced-air cooling and onboard protection circuits are part of its design for heavier loads.
Strong match
Who this is for
- Powering main speakers or subwoofers in medium- to large-venue PA systems.
- DJ and live-show rigs needing RCA or XLR source connections.
- Fixed installations that benefit from front-panel channel level and status monitoring.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Two independent channel controls
Each channel’s level is adjusted separately.
Detail 03
Speakon and binding-post outputs
Either output connection can be used with passive-speaker rigs.
Detail 04
19 x 3.5 x 14.4 inches
Its dimensions suit a 19-inch-width installation space.
Final check
Know before you order
- 01Confirm the available AC line voltage matches the amplifier version: 120V, 220V, or 230–240V options are listed.
- 02Plan source and speaker connections around the RCA/XLR inputs and Speakon/binding-post outputs.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What inputs does the XLi 3500 accept?
It has RCA and XLR inputs.
02What do the front-panel indicators show?
They provide visual feedback for power, signal, clipping, and faults.
03Does it have adjustable input sensitivity?
Yes. Operators can select 0.775V or 1.4V input sensitivity.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20kHz, +0/-1dB (at 1W)
9 detailsConnections & power
- Voltage Gain
- 36dB
- Crosstalk Below Rated Power 20hz 1khz
- -75dB, -59dB
- Output Types
- Speakon and binding posts
- Input Types
- RCA and XLR
- AC Line Voltage
- 120V~60Hz; 220V~50/60Hz; 230-240V~50/60Hz (+10%)
- Iec Power Connector
- 15A
- Input Impedance Balanced
- 20 kohm
- Input Sensitivity
- 0.775V or 1.4V
- Input Impedance Unbalanced
- 10 kohm
3 detailsSize & weight
- Weight
- 43
- Signal to Noise Ratio A Weighted
- >100dB
- Dimensions
- 19 inch x 3.5 inch x 14.4 inch
2 detailsOther
- Slew Rate
- >10V/μs
- Damping Factor 8 Ohms 10hz 400hz
- >200
