Detail 01
600W peak, 150W continuous
Match your amplifier to the 150-watt continuous figure. The 600-watt number describes brief transients, not what it takes all night.

Independent shopping perspective
A passive 15-inch two-way PA cabinet, 8 ohms and 150 watts continuous. For small venues and bands that already own a power amp or powered mixer.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Match your amplifier to the 150-watt continuous figure. The 600-watt number describes brief transients, not what it takes all night.
Detail 02
Two of these on one amp channel present a 4-ohm load. Only wire them that way if the amp is rated for 4 ohms.
Detail 03
Middling efficiency. It takes real amplifier watts to get loud, so a small amp will run out of headroom before the cabinet does.
Detail 04
Vocals and guitars are covered. Kick drum and bass synth thin out below the low end limit, so add a sub for those.
Detail 05
Wide horizontally, narrow vertically. Aim it toward ear height or listeners standing off-axis lose the top end.
Detail 06
A two-hand lift with a real footprint. Measure your vehicle before committing to a pair plus stands.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. It is passive and needs an external power amp or a powered mixer. There is no power cord and no input gain control.
One stable at 8 ohms delivering roughly 150 watts continuous per channel. Extra headroom is fine as long as you keep levels under control.
For speech, acoustic music and most bands, no. For DJ sets or heavy kick and bass, yes — output falls away at 50 Hz.
Two 8-ohm cabinets in parallel give the amp a 4-ohm load. Check the amplifier is rated for that before wiring it up.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.