Detail 01
Passive, 8 ohms
You supply the amplifier. Two of these on one amp channel drops to 4 ohms, so check your amp handles that load.

Independent shopping perspective
A 12-inch passive PA cabinet for small to mid-size rooms. Needs an external power amp, so it suits anyone already running a rack.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
You supply the amplifier. Two of these on one amp channel drops to 4 ohms, so check your amp handles that load.
Detail 02
Match an amp near 200W per channel at 8 ohms. An underpowered amp clipping is what kills tweeters.
Detail 03
Efficient enough that modest amp power gets it loud. Every doubling of amp watts adds only 3dB on top.
Detail 04
The horn takes over above 1.9kHz, so vocal presence and cymbals come from the tweeter, not the woofer.
Detail 05
Wide horizontal, narrow vertical. Aim it at ear height across the room rather than at the ceiling.
Detail 06
Light for a 12-inch box and easy to pole-mount, but the low end wants a sub for kick and bass.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
One rated around 200W continuous into 8 ohms per channel. Headroom above that is fine; running a small amp into clipping is more likely to damage the tweeter.
There is no amplifier inside. Add the cost of a power amp and speaker cable before comparing it to a powered box.
Two 8-ohm cabinets in parallel present a 4-ohm load. Confirm your amp is rated for 4 ohms per channel before wiring them that way.
For vocals and backing tracks in a small to mid-size room, yes. The 95dB sensitivity and 12-inch woofer cover it; add a sub if you need low end.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.