Korena
Product detailSKU #1274115050244

BehringerEUROLIVE VS1220 600W 12" Passive Speaker

Behringer logo
Behringer EUROLIVE VS1220 600W 12" Passive Speaker
1/4

Independent shopping perspective

The Korena take

A 12-inch passive PA cabinet, 8 ohms, 600W peak. For anyone who already owns a power amp and wants cheap, light boxes.

Behringer EUROLIVE VS1220 600W 12" Passive Speaker product detail
Product studyBehringer EUROLIVE VS1220 600W 12" Passive Speaker
Behringer EUROLIVE VS1220 600W 12" Passive Speaker alternate view
Alternate view

Strong match

Who this is for

  • Adding boxes to a rig that already has a power amp
  • Mobile setups where 38 pounds beats a heavier powered box
  • Monitor or fill duty in small rooms

Consider the trade-offs

When to look elsewhere

  • Anyone without a power amp — it makes no sound alone
  • Setups needing deep low end without a subwoofer
  • Large rooms or outdoor stages

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Behringer EUROLIVE VS1220 600W 12" Passive Speaker construction detail

Detail 01

Passive

No amplifier inside. You need a separate power amp and speaker cable, plus a mixer ahead of it.

Detail 02

8 ohms

Standard load. Two per amp channel drops to 4 ohms — check your amp is rated for that before wiring them in parallel.

Detail 03

600W peak, 150W continuous

Match your amp to the continuous figure, not the peak. Peak is a short-burst rating.

Detail 04

93dB sensitivity, 1W at 1 meter

Middling efficiency. You'll want real amp power behind it to get stage volume.

Detail 05

60Hz to 20kHz response

Vocals, guitars and keys sit fine. Kick drum and synth bass want a sub underneath.

Detail 06

80° x 40° dispersion

Wide horizontally, narrow vertically. Aim it at ear height — tilted wrong, people lose the highs.

Final check

Know before you order

  1. 01No amplifier, speaker cable, stand or cover included
  2. 02Confirm your power amp's minimum impedance before running two per channel
  3. 0337.7 pounds each — light, but still a two-box carry

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I plug this into a mixer directly?

No. A passive cabinet needs a power amplifier between the mixer and the speaker. A mixer's line output alone won't drive it.

02How much amplifier power should I use?

Size the amp around the 150W continuous rating at 8 ohms. Headroom above that is fine if you don't run it flat out.

03Can I use it as a floor monitor?

It's a full-range 2-way cabinet, so it works for monitor duty, but it's a standard cabinet shape rather than a wedge.

04Does it need a subwoofer?

For vocals and speech, no. For DJ work or anything with kick and bass, add one — response stops at 60Hz.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Frequency Response
60Hz–20kHz
Impedance
8 ohms
Crossover Frequency
3.5kHz
1 detailsBody & build
Type
2-way full-range loudspeaker
2 detailsConnections & power
Continuous Power
150W
Peak Power
600W
2 detailsSize & weight
Dimensions Wxhxd
14.6 inch x 23.6 x 16.9 inch (370 x 600 x 430 mm)
Weight
37.7
2 detailsOther
Sound Pressure Level SPL
93dB (Full Space, 1 watt @ 1 meter)
Dispersion
80º x 40º

Complete your setup

Worth comparing

More from Behringer