Detail 01
10-inch woofer, 65Hz low end
Handles vocals and full-range music, but kick drum and sub-bass drop off. Add a sub for dance music.
Product detailSKU #1274115049878
BehringerEUROLIVE B210D 200W 10" Powered Speaker
1/5
Independent shopping perspective
The Korena take
A 10-inch powered PA speaker in red. For small rooms, DJ sets, and portable rigs where a 15-inch box is more than you need.
Strong match
Who this is for
- Small bars, parties, and rehearsal spaces
- A portable DJ or vocal rig one person loads in
- A stage monitor or fill speaker beside a larger main system
Consider the trade-offs
When to look elsewhere
- Bass-heavy music without a subwoofer underneath it
- Large outdoor events or rooms needing high sustained volume
- Anyone who needs a neutral color — this one is red
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
113dB max SPL at 1 meter
Loud enough for a small room or crowd. Not enough headroom for a large hall or open air.
Detail 03
Powered, IEC mains connection
The amp is inside. It needs a wall outlet at the speaker position, not a separate power amp.
Detail 04
Input sensitivity -40dBu to +4dBu
Accepts anything from a microphone to a line-level mixer output, so it works with or without a mixer.
Detail 05
2.4kHz crossover
Vocals sit mostly in the woofer, with the tweeter taking sibilance and cymbals above that point.
Detail 06
18.77 lbs
One-hand carry weight. Two of these plus stands is a realistic single-trip load.
Detail 07
Optical limiter
The speaker clamps its own peaks before the amp clips, which protects the driver when someone pushes the gain.
Final check
Know before you order
- 01Speaker stands, cables, and a mixer are not included
- 02Needs a power outlet wherever you place it
- 03120V North American model — overseas use requires the matching voltage version
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Do I need an amplifier?
No. The amplifier is built into the cabinet. You connect a signal source and mains power, nothing else.
02Can I plug a microphone straight in?
Yes. The input handles levels from -40dBu up to +4dBu, so a mic works without a mixer, though you lose EQ and multiple channels.
03Is one enough for a party?
One covers a small room or acts as a fill. For stereo coverage of a crowd, run a pair, and add a sub if you want real low end.
04Will it fit on a speaker stand?
At under 19 pounds it is within range of standard tripod stands. Check that your stand's pole socket and weight rating match before mounting.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Response
- 65Hz to 20kHz
- Sensitivity
- -40dBu to +4dBu
- Crossover Frequency
- 2.4kHz
1 detailsBody & build
- Color
- Red
5 detailsConnections & power
- Input Impedance
- 20 kohm
- Max Input Level
- +22dBu
- Peak Power
- 42W @ 8 ohms
- Power Consumption Max
- 300W
- Connector
- XLR connector
1 detailsSize & weight
- Weight
- 18.77
11 detailsOther
- Usa Canada
- 120V, 60Hz (T 4.0 A H 250V)
- Japan
- 100V, 50–60Hz (T 4.0 A H 250V)
- Uk Australia
- 240V, 50Hz (T 2.0 A H 250V)
- Sound Pressure Level
- max. 113dB SPL @ 1m
- Dynamic Equalizer
- Processor-controlled
- Mains Connection
- Standard IEC connector
- High
- 12kHz/-15dB
- Low
- 80Hz/-15dB
- Limiter
- Optical
- RMS 1 Thd
- 38W @ 8 ohms
- Europe
- 230V, 50Hz (T 2.0 A H 250V)
