Detail 01
50-inch carbon fiber rod
Long reach with very little flex or added weight, so a light hanger or stand holds it steady.
Product detailSKU #1273887989181
AudixMB5050 MicroBoom 50" Carbon Fiber Boom System With M1250B Mic
Independent shopping perspective
The Korena take
A 50-inch carbon fiber boom with a mini condenser on the end, for overhead pickup where the mic needs to stay out of sight.
Strong match
Who this is for
- Choir and ensemble pickup from a ceiling or stand mount
- Theater and lectern work where a visible mic is a problem
- Long reach without a heavy stand crowding the stage
Consider the trade-offs
When to look elsewhere
- Close-miking loud sources — this is a distance pickup tool
- Handheld or roving vocal work; it mounts, it doesn't travel
- Rigs with no phantom power at the input
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Mini-XLR at both ends
Not standard XLR — your run to the board has to start with mini-XLR at the boom.
Detail 03
Steel gooseneck at the capsule
Aims the mic and stays where you bend it instead of drifting over a long set.
Detail 04
0.20-inch rod diameter
Thin enough to read as a hairline against a dark backdrop at audience distance.
Detail 05
Non-reflective black finish
Kills stage-light glare, so the boom doesn't flash under spots or on camera.
Detail 06
Brass connectors
Contacts and threads survive repeated setup and teardown better than plastic ones.
Final check
Know before you order
- 01Plan the mount point first — the boom needs something to hang or clamp on
- 02Phantom power has to be available at the input for the condenser capsule
- 03Check that your cable run handles mini-XLR at the boom end
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this come with a microphone?
Yes. The M1250B miniature condenser is part of the MB5050 system and sits at the end of the 50-inch boom.
02Does it need phantom power?
Yes. The capsule is a condenser, so the mixer or preamp input has to supply standard phantom power.
03How long is the boom exactly?
50 inches, or 1,270 mm, of carbon fiber rod about 0.20 inch across, with a steel gooseneck at the capsule end.
04Will it be visible on camera?
The rod is 0.20 inch across in non-reflective black, so it reads as a thin dark line rather than a bright glare.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsBody & build
- Color
- Black
- Material Rod
- Carbon Fiber
- Top
- Mini-XLR female
- Gooseneck
- Steel
- Body Finish
- Non-reflective black
- Finish
- Non-reflective black
1 detailsConnections & power
- Connectors
- Brass
3 detailsSize & weight
- Length of Mb50
- 50 inch/1,270 mm
- Diameter
- .20 inch/7.4 mm
- Weight
- 2.5
1 detailsOther
- Bottom
- Mini-XLR male
