Detail 01
25-foot permanently attached cable with TA3F connector
The cable is not removable and runs to the included wall/ceiling power module. Plan the drop length before mounting.

Independent shopping perspective
Hanging cardioid condenser for choirs, stages and ceilings. For permanent installs where the mic needs to disappear overhead.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
The cable is not removable and runs to the included wall/ceiling power module. Plan the drop length before mounting.
Detail 02
You can swap the capsule later to narrow or widen pickup without replacing the whole mic. Elements sold separately.
Detail 03
Adds 10 dB at the module for distant sources like a choir, so your mixer preamp is not pushed to the top.
Detail 04
Ample for choirs and speech at distance. Not the mic to hang directly over a loud drum kit or amp stack.
Detail 05
Cuts HVAC rumble and stage thump, which matters more overhead where the mic hears the whole room.
Detail 06
Small and light enough to hang nearly invisibly on the included steel hanger from a ceiling or truss.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
AT8153 two-stage foam windscreen, AT8451 steel hanger, AT8534 wall/ceiling power module, and AT8438 5/8-27 stand adapter. You still supply the XLR run to your mixer.
Yes. The included AT8438 5/8-27 stand adapter lets it mount to a standard stand thread instead of the hanger.
Aim it at the group rather than straight down, and use the +10 dB gain setting on the power module if the level is low.
Yes. Optional UE-H hypercardioid, UE-O omnidirectional, and UE-UL Uniline elements screw in place of the stock cardioid capsule.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.