Detail 01
¼-inch TRS balanced input/output connections
Your balanced signal connections use ¼-inch TRS connections.
Product detailSKU #1407768424192
ArtSCL2 Compressor
Sale
1/3
Independent shopping perspective
The Korena take
ART’s SCL2 is a two-channel dynamics processor that combines compression, limiting, expansion, and gating for live-sound work. It can control volume spikes and potential distortion, while its gate is intended to tighten drum and vocal microphone signals. Set it for subtle compression or hard limiting, then use adjustable attack and release controls that adapt to the audio being processed. Full auto mode is available, and separate gain-reduction meters keep each channel visible.
Strong match
Who this is for
- Live systems needing control over volume spikes and potential distortion.
- Drum and vocal microphone processing with gate-based noise reduction.
- Two-channel dynamics control with separate gain-reduction metering.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Side-chain ¼-inch TRS connection
The side-chain connection uses a TRS jack with tip send and ring receive.
Detail 03
1.75 in. H × 19 in. W × 6 in. D
These are the unit’s stated physical dimensions.
Final check
Know before you order
- 01Power requirement is specified as 120 V, 60 Hz/50H, with 10 W maximum consumption.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the SCL2 be used for hard limiting?
Yes. Its adjustment range runs from smooth, subtle compression to hard limiting.
02Does it offer automatic operation?
Yes. The SCL2 includes a full auto mode.
03How many channels does it process?
It is a two-channel processor, with gain reduction displayed for each channel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 10Hz to 40kHz, +/- .5dB
1 detailsBody & build
- Side Chain Connections
- ¼-inch TRS (Tip = Send, Ring = Receive)
6 detailsConnections & power
- Input Impedance
- 10k Ohms
- Output Impedance
- 200 ohms (bal), 100 Ohms (unbal)
- Power Requirements
- 120 V 60 Hz/50H, 10W max.
- Maximum Output Level
- +20 dBu Balanced
- Input Output Connections
- ¼-inch TRS balanced
- Maximum Input Level
- +20 dBu Balanced
2 detailsSize & weight
- Weight
- 4.2
- Dimensions
- 1.75 inch H x 19.0 inch W x 6 inch D (4.5 x 48 x 15.2 cm)
4 detailsOther
- Dynamic Range
- 120 dB
- Attack Time
- .25mSec to 100mSec Adjustable
- Total Harmonic Distortion
- <0.06% (typical)
- Release Time
- 100mSec to 3 Sec Adjustable
