Detail 01
Three-way split
One mic feeds three destinations at once: a direct output plus two isolated outs.
Product detailSKU #1273887987208
ArtS8-3Way Eight-Channel Three-Way Mic Splitter
1/3
Independent shopping perspective
The Korena take
Eight-channel three-way mic splitter for feeding one stage input set to three separate mixing positions. For engineers running FOH, monitors, and a recording or broadcast feed off the same mics.
Strong match
Who this is for
- Splitting stage mics to FOH and a separate monitor console
- Feeding a recording rig without stealing inputs from the house desk
- Broadcast or livestream feeds that need their own isolated console
Consider the trade-offs
When to look elsewhere
- Bands with a single console and no second mix position
- Anyone needing more than eight channels in one box
- Line-level or instrument signal routing between amps and pedals
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Eight channels
Covers a small drum kit plus a couple of vocal mics, or a modest horn section.
Detail 03
Mic-level splitting
Sits between the mics and the consoles, before any preamp gain is applied.
Detail 04
Signal processor, not a preamp
Adds no gain. Each console still supplies its own preamp and phantom power decisions.
Final check
Know before you order
- 01Cabling to three destinations is not included; budget for the extra mic runs
- 02Only one console can send phantom power to condenser mics
- 03Confirm eight channels covers your stage before adding a second unit
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many places can one mic go?
Three. Each of the eight channels splits to a direct output plus two additional outputs, so FOH, monitors, and a recording feed can all run at once.
02Can I use it with condenser mics that need phantom power?
Yes, but phantom should come from one console only. Decide which desk supplies it and set the other consoles' phantom off for those channels.
03Do I need power for it?
It is a passive splitter, so no external supply is needed for the splitting itself.
04Will it work for more than eight mics?
Not on its own. Eight channels is the limit; larger stages need a second unit or a bigger splitter.
