Korena
Product detailSKU #1430146864705

Radial EngineeringJ48 Stereo Active Direct Box

Radial Engineering
Radial Engineering J48 Stereo Active Direct Box

Independent shopping perspective

The Korena take

Built for professional touring and studio recording, the J48 Stereo is an active direct box with a protected steel enclosure and internal I-beam support for its circuit board. Its phantom-powered switching supply is designed for added headroom, lower distortion, and high-output instrument handling across a 10 Hz–40 kHz linear response. A -15 dB pad, 80 Hz high-pass filter, polarity reverse, and ground-lift design give you practical control when cleaning up difficult signals or managing dual-element pickup sources.

Radial Engineering J48 Stereo Active Direct Box product detail
Product studyRadial Engineering J48 Stereo Active Direct Box

Strong match

Who this is for

  • Touring and recording setups that need an active direct box for high-output instruments.
  • Reducing low-frequency mud or excessive resonance with the built-in 80 Hz high-pass filter.
  • Dual-element pickup sources that need polarity alignment or help addressing acoustic feedback hot spots.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

14-gauge steel enclosure with bookend design

The enclosure is built to protect the switches and connectors from damage.

Detail 02

48V phantom-powered switching supply

It converts phantom power to AC to increase headroom for signal handling and lower distortion.

Detail 03

10 Hz–40 kHz linear frequency response

The stated linear response range extends from 10 Hz to 40 kHz.

Detail 04

-15 dB pad

Can be engaged for extreme signal handling.

Detail 05

80 Hz high-pass filter

Gently rolls off frequencies below 80 Hz to clean up mud and excessive resonance.

Detail 06

Side-access 180-degree polarity reverse

Helps phase-align dual-element pickup sources or address acoustic feedback hot spots.

Final check

Know before you order

  1. 01The switching power supply uses 48V phantom power.
  2. 02Use the -15 dB pad when extreme signal handling is required.
  3. 03The polarity reverse is intended for dual-element pickup sources when phase alignment or acoustic hot-spot control is needed.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Does the ground lift turn off phantom power?

No. Its DC-to-DC converter lifts the audio ground at the power supply, retaining phantom power.

02What does the high-pass filter do?

It gently rolls off frequencies below 80 Hz to clean up mud and excessive resonance.

03Can it handle high-output instruments?

Yes. The J48 Stereo is designed to handle high-output instruments, and its -15 dB pad can be engaged for extreme signal handling.

Worth comparing

More from Radial Engineering