Detail 01
14 outputs
One input can feed ten XLR destinations and four 3.5 mm TRS connections.
Product detailSKU #1500000280121
Radial EngineeringExo-Pod 10 Channel Press Box & Expander
1/8
Independent shopping perspective
The Korena take
The Exo-Pod takes one line-level XLR feed and distributes it to ten XLR outputs plus four 3.5 mm TRS connections. It is suited to press and media setups where cameras, handheld recorders, tablets, and other media systems need the same audio source. A variable input trim adjusts the overall output level locally. Transformer isolation, individual XLR ground lifts, and an XLR thru connection help manage ground-loop noise while allowing additional Exo-Pods to be linked.
Strong match
Who this is for
- Press events distributing one line-level audio feed to cameras, handheld recorders, tablets, and media systems.
- Expandable media-audio setups linking multiple Exo-Pods through the XLR thru connection.
- Locations where transformer isolation and XLR ground lifts are needed to address ground-loop noise.
Consider the trade-offs
When to look elsewhere
- Use outside dry locations or outside the specified 5°C to 40°C operating range.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Passive circuit; no power required
The Exo-Pod operates without a power connection.
Final check
Know before you order
- 01Use it with a line-level XLR input.
- 02It is specified only for dry locations between 5°C and 40°C.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many outputs does the Exo-Pod provide?
It provides ten XLR outputs and four 3.5 mm TRS outputs.
02Does the Exo-Pod need power?
No. It uses a passive circuit and requires no power.
03Can I link more than one Exo-Pod?
Yes. Its XLR thru connector allows multiple units to be linked for a larger distribution system.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Audio circuit type
- Passive
1 detailsSize & weight
- Shipping weight
- 4lb
26 detailsOther
- Shipping size (L x W x D)
- L:13.37" x W:5.5" H:3.25" (571.5mm x 260.35mm x 114.3mm)
- Noise
- XLR: -111dBu | 3.5mm: -86dBu
- Dynamic range
- >136dB / >100dB
- Conditions
- For use in dry locations only between 5°C and 40°C
- Clip Level
- >+26dBu
- Output Connectors
- XLR, 3.5mm
- Tier
- new
- Output Impedance
- XLR: 1000 Ω | 3.5mm: 4600 Ω
- Frequency response
- <20Hz to >20kHz ±1dB
- Number of channels
- 14 outputs
- Common Mode Rejection Ratio
- 63dB
- Category Source
- detail
- Construction
- 14-gauge steel chassis & outer shell
- Equivalent Input Noise
- -108dBu/-84dBu
- Size (L x W x D)
- L:11.75"" x W:5" H:2.25" (298.45mm x 127mm x 57.15mm)
- Input Connectors
- XLR
- Korena Special
- false
- Weight
- 3.6lb
- Total harmonic distortion
- 0.001%
- Input Impedance
- 350 Ω
- Intermodulation Distortion
- 0.006%
- Phase Deviation
- -5/+25°
- Source Id
- site51500000280121
- Prop65
- WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Gain
- -3.5dB / -18dBu
- Power
- Passive, no power required
Worth comparing
1 of 12
More from Radial Engineering
1 of 8
