Korena by Guitar Center
Product detailSKU #1500000386684

AltoTS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control

Alto
Alto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control
1/8

Independent shopping perspective

The Korena take

The TS408 is an active 8-inch PA speaker that combines 2,000W power with onboard mixing, Bluetooth playback, DSP control, and app access. Its three-channel mixer gives separate level control for connected sources and Bluetooth audio, while the two balanced combo inputs and XLR link output cover direct connections and speaker chaining. Use it upright on a 36 mm pole, as a wedge monitor, or in an installed flown or suspended position. True Wireless Stereo pairs two TS408 speakers for a wireless stereo system.

Alto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control product detail
Product studyAlto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control
Alto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control alternate view
Alternate view

Strong match

Who this is for

  • Small PA setups needing microphone, instrument, and Bluetooth sources controlled from one powered speaker.
  • Floor-monitor use, pole-mounted reinforcement, or installations using the speaker’s specified suspension and flown options.
  • Wireless stereo playback when using two TS408 loudspeakers with True Wireless Stereo.

Consider the trade-offs

When to look elsewhere

  • A single-speaker setup when you specifically need the two-speaker True Wireless Stereo function.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Alto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control construction detail

Detail 01

Built-in 3-channel mixer

Provides independent level control for connected sources and Bluetooth audio.

Detail 02

2 × balanced XLR/1/4-inch TRS combo inputs

Accepts microphone, instrument, and other connected audio sources.

Detail 03

XLR link output

Allows multiple TS408 speakers to be chained.

Detail 04

USB charging port: 5V, 2.1A

Provides a dedicated USB charging connection.

Detail 05

Mounting options

Can be pole-mounted, flown, suspended from integral M6 points, or placed in wedge-monitor position.

Final check

Know before you order

  1. 01True Wireless Stereo requires two TS408 speakers.
  2. 02The speaker uses an IEC power-cable input.
  3. 03Choose the mounting method to match the listed 36 mm pole, flown, M6 suspension, or wedge-monitor options.
Alto TS408 8" 2,000W 2-Way Powered Loudspeaker With Bluetooth, DSP & App Control close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the TS408 play Bluetooth audio?

Yes. It has Bluetooth connectivity and a Bluetooth volume control.

02Can I link another speaker?

Yes. The rear XLR output is a link output for chaining speakers.

03Can I control the TS408 from an app?

Yes. The free Alto App provides remote control and lets you save and recall EQ settings.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

29 detailsOther
Frequency Range
52Hz–20kHz (-10dB)
Mic/Inst. Gain / Volume Control Range
-∞ to +50dB
Low-Frequency Driver
8" driver, 2" (50 mm) high-temperature voice coil, 1 x 650W RMS @ 2 ohm
Enclosure
Injected molded enclosure and perforated metal grille
Horn Coverage
90° horizontal x 60° vertical (nominal)
Power Connection
IEC
Tier
new
Voltage
100-120V, 50/60Hz; 220–240V, 50-60Hz
Controls
Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size
Frequency Response
62Hz–20kHz (+/-3dB)
Indicators
(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped, (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
Protection
Electronic clip, thermal, and transducer overdrive protection
USB Charging Port
5V 2.1A
Consumption
900W
Fuse
100-120V T10AL AC250V; 220–240V T5AL AC250V
Category Source
detail
Operating Temperature
10°C to 45°C (14°F to 113°F)
Output Power
2,000W
Maximum SPL
130dB (peak), 127dB (continuous) (dB-SPL @ 1 m)
Dimensions
17.2" x .10.1" x 9.6"/436 x 256 x 245 mm
Korena Special
false
Input Impedance Line
10 kohm balanced, 20 kohm unbalanced, Mic: 1.2K
Crossover Frequency
2kHz
Weight
20.7 lb./9.4 kg
Line Gain/Volume Control Range
-∞ to 0dB, +4dBu nominal, +10dBu for max output
Connectors
(2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
Mounting/Installation
Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
Source Id
site51500000386684
High-Frequency Driver
1” exit ceramic driver with 1.4” (35 mm) coil, 1 x 350W @ 4 ohm

Complete your setup

Worth comparing

More from Alto