Korena
Product detailSKU #1500000414611

AltoBusker Battery-Powered PA Pair With Speaker Stands

Alto
Alto Busker Battery-Powered PA Pair With Speaker Stands
1/10

Independent shopping perspective

The Korena take

This Alto package pairs two battery-powered Busker speakers with two SPS502 speaker stands and a carrying bag. It gives an on-the-go performer a portable two-speaker setup with built-in Alesis FX, Bluetooth streaming on Channel 3, a 1/8-inch AUX input, and XLR output for routing onward to FOH or another destination. Each speaker can stand vertically, sit at an angle, or mount on a pole. The included stands provide 11 height positions with locking pins and locking shaft knobs.

Alto Busker Battery-Powered PA Pair With Speaker Stands product detail
Product studyAlto Busker Battery-Powered PA Pair With Speaker Stands
Alto Busker Battery-Powered PA Pair With Speaker Stands alternate view
Alternate view

Strong match

Who this is for

  • Performers who need a portable two-speaker setup with stands for stages or home rehearsal.
  • Playing backing tracks over Bluetooth while rehearsing alongside vocals or guitar.
  • Sending the speaker mix through XLR to FOH while retaining a nearby Busker setup.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Alto Busker Battery-Powered PA Pair With Speaker Stands construction detail

Detail 01

Two Busker speakers plus two SPS502 stands and carry bag

The package supplies a paired speaker-and-stand setup.

Detail 02

Bluetooth on Channel 3

Lets you wirelessly stream backing tracks from a smart device.

Detail 03

1/8 in. AUX input and XLR output

Provides a wired input for sources such as drum machines and an output to FOH or another destination.

Detail 04

6.5 in. woofer and 1 in. tweeter

These are the listed low- and high-frequency speaker drivers.

Detail 05

11 stand adjustment holes with locking pins and shaft knobs

Allows height placement and locks the stands in their selected setup.

Final check

Know before you order

  1. 01Battery-life figures differ: Eco Mode is described as up to 24 hours and specified as up to 90 hours; confirm the current rating before purchase.
  2. 02Charging time is listed as 12 hours.
  3. 03The speakers can be placed vertically, angled, or pole mounted.
Alto Busker Battery-Powered PA Pair With Speaker Stands close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What comes in the package?

It includes two Alto Busker battery-powered speakers, two Proline SPS502 speaker stands, and a carry bag.

02Can I stream backing tracks wirelessly?

Yes. Bluetooth is available on Channel 3 for streaming from a smart device.

03Can I connect this setup to front-of-house?

Yes. Each Busker has an XLR output for a direct line to FOH or another destination.

04Can I adjust the effects separately?

Yes. The built-in Alesis FX processing has dedicated knobs to adjust effect amounts independently.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Low Frequency
6.5” (165.1 mm) woofer
Frequency
2402 – 2480 MHz Maximum Transmission Power: 10 dBm Protocol: BLE
High Frequency
1.0” (25.4 mm) tweeter
2 detailsBody & build
Color
Red
Type
6.6 Ah, 12 V, Lithium Ion
1 detailsConnections & power
Voltage
100–240 VAC, 50/60 Hz, 120 W; 220–240 VAC, 50/60 Hz; 120 W
1 detailsIn the box
Standard Mode
200 W (peak)
8 detailsOther
Charging Time
12 hours
Eco Mode
50 W (peak)
Profile
A2DP, AVRCP
Range
100 ft. (30.5 m)
Version
5.0 Codec: SBC
Life
Eco Mode: up to 90 hours; Standard Mode: up to 30 hours
Fuse
100–120 V, T1.6AL AC250 V; 220–240 V, T0.8AL AC250 V
Connection
IEC