Detail 01
22 AWG stranded tinned-copper conductors
Uses two stranded conductors arranged as one twisted pair.
Product detailSKU #1500000038777
ACCU CABLE3-Pin DMX Lighting Cable 15 ft.
1/2
Independent shopping perspective
The Korena take
ACCU CABLE’s 15-foot 3-pin DMX lighting cable is suited to lighting connections that need more distance than a short patch run. It uses one twisted pair with two 22 AWG stranded, tinned-copper conductors, polyethylene insulation and inner jacket, plus a PVC outer jacket. The shielding combines a full-coverage Duofoil tape layer with an 85% tinned-copper braid, and the cable carries a 110-ohm nominal characteristic-impedance specification. In black, it provides a 15-foot connection length for appropriately spaced lighting equipment.
Strong match
Who this is for
- DMX lighting connections where equipment needs a 15-foot cable run between positions.
Consider the trade-offs
When to look elsewhere
- Lighting runs requiring more than the cable’s stated 15-foot length.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Duofoil tape shield plus 85% tinned-copper braid
Combines a 100%-coverage tape layer with a tinned-copper braid layer.
Detail 03
110-ohm nominal characteristic impedance
The cable is specified at 110 ohms.
Final check
Know before you order
- 01Confirm that a 3-pin DMX lighting cable is required.
- 02Measure the run: this cable is 15 feet long.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long is this DMX cable?
It is 15 feet long.
02What conductor size does it use?
It uses 22 AWG stranded tinned-copper conductors.
03What shielding does it have?
It has a Duofoil tape shield with 100% coverage and a tinned-copper braid shield with 85% coverage.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Nominal Characteristic Impedance
- 110 Ohms
1 detailsPlayability
- Minimum Bend Radius Install
- 3.2 inch
4 detailsBody & build
- Conduct or Material
- TC-Tinned Copper
- Color
- Black
- Pair Color Code
- Black/White
- Insulation Material
- PE Polyethylene
2 detailsConnections & power
- Inner Jacket Material
- PE- Polyethylene
- Outer Jacket Material
- PVC-Polyvinyl Chloride
6 detailsSize & weight
- Bulk Cable Weight
- 31 lbs./1000
- Inner Jacket Diameter
- .055 inch
- Overall Nominal Diameter
- .229 inch
- Weight
- 31
- Lay Length
- 2.5 inch
- Conductor Diameter
- .0354 inch
20 detailsOther
- Total Number of Conductors
- 2
- Nominal Conductor DC Resistance 20 Degrees C
- 24 Ohms/1000 feet
- Operating Temperature Range
- -30 degrees C To + 75 degrees C
- Stranding
- 0.15 x 19
- Maximum Recommended Pull Tension
- 72 lbs.
- Nominal Capacitance Conductor to Conductor 1khz
- 12.8 pF/foot
- Nominal Velocity of Propagation
- 66%
- Nominal Attenuation DB 100 Feet
- 0.6 (@ 1 MHz) dB/100 feet
- Nominal Delay
- 1.6 nanoseconds per foot
- Twists
- 4.8 per foot
- Direction
- Left Hand Lay
- Maximum Recommended Current
- 2.1 Amps per conductor @ 25 degree C
- Nominal Outer Shield D C Resistance 20 Degrees C
- 3.4 Ohms/ 1000 feet
- Awg
- 22
- Number of Pairs
- 1
- Outer Shield Trade Name
- Duofoil
- Outer Shield Type
- Tape/Braid
- Layer 2
- Material Trade Name--Duofoil, Type--Braid, Material--TC-Tinned Copper, Coverage %--85
- Layer 1
- Material Trade Name--Duofoil, Type--Tape, Material--Aluminum Foil-Polyester, Coverage %--100
- Nominal Cap Cond to Other Cond Shield 1khz
- 23 pF/foot
