Detail 01
Two twisted pairs
Provides four conductors arranged as two pairs.
Product detailSKU #1500000043278
ACCU CABLE5-Pin DMX Lighting Cable 3 ft.
1/8
Independent shopping perspective
The Korena take
A short 5-pin DMX lighting cable for close-range connections in a lighting setup. Its 3-foot length keeps nearby runs compact, while the cable uses two twisted 22 AWG tinned-copper pairs with polyethylene insulation. Duofoil shielding combines full foil coverage with an 85% tinned-copper braid, and a PVC jacket forms the outside layer.
Strong match
Who this is for
- Short DMX connections between lighting components positioned close together.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
110-ohm nominal characteristic impedance
The cable is specified at 110 ohms.
Detail 03
3.5-inch minimum installation bend radius
Allow at least this bend radius when installing the cable.
Final check
Know before you order
- 01Confirm that a 3-foot cable length suits the distance between your lighting components.
- 02Confirm your setup uses 5-pin DMX connections.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long is this cable?
It is 3 feet long.
02What shielding does it use?
It has Duofoil shielding: 100% foil coverage plus an 85% tinned-copper braid.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
37 detailsOther
- Lay Length
- 1.1"
- Inner Jacket Diameter
- .055"
- Nominal Cap Cond. To Other Cond. & Shield @ 1KHz
- 23 pF/foot
- Overall Nominal Diameter
- .295"
- Number of Pairs
- 2
- Direction
- Left Hand Lay
- Total Number of Conductors
- 4
- AWG
- 22
- Tier
- new
- Twists
- 10.9 per foot
- Outer Jacket Material
- PVC-Polyvinyl Chloride
- Individual Pair Nominal Shield DC Resistance @ 20 degrees C
- 15 Ohms/1000 feet
- Pair Color Code
- Green/Black/Red/White
- Category Source
- detail
- Nominal Conductor DC Resistance @ 20 degrees C
- 24 Ohms/1000 feet
- Conduct or Material
- TC-Tinned Copper
- Inner Jacket Material
- PE- Polyethylene
- Nominal Attenuation (dB/100 feet)
- 0.6 (@ 1 MHz) dB/100 feet
- Outer Shield Trade Name
- Duofoil
- Operating Temperature Range
- -30 degrees C To + 75 degrees C
- Outer Shield Type
- Tape/Braid
- Nominal Characteristic Impedance
- 110 Ohms
- Nominal Delay
- 1.6 Nanoseconds per foot
- Korena Special
- false
- Insulation Material
- PE Polyethylene
- Minimum Bend Radius (Install)
- 3.5"
- Maximum Recommended Current
- 2.1 Amps per conductor @ 25 degrees C
- Conductor Diameter
- .0354"
- Bulk Cable Weight
- 50 lbs./1000
- Layer 1
- Material Trade Name--Duofoil, Type--Tape, Material--Aluminum Foil-Polyester, Coverage %--100
- Maximum Recommended Pull Tension
- 22 lbs.
- Layer 2
- Material Trade Name--Duofoil, Type--Braid, Material--TC-Tinned Copper, Coverage %--85
- Nominal Velocity of Propagation
- 76%
- Source Id
- site51500000043278
- Prop65
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Stranding
- 0.15 x 19
- Nominal Capacitance Conductor to Conductor @ 1KHz
- 12.5 pF/foot
Worth comparing
1 of 12
More from ACCU CABLE
1 of 8
