Detail 01
1,100W dynamic power
Power is divided between the 500W subwoofer and 600W line-array speaker.
Product detailSKU #1500000384185
YamahaDXL1K 1,100W Powered Speaker System
1/9
Independent shopping perspective
The Korena take
DXL1K combines a powered subwoofer and line-array speaker in a 1,100W system. Assembly is direct: attach the line-array speaker to the top of the subwoofer cabinet, then use it with an outboard mixer. Its 170° × 30° coverage, 37 Hz–20 kHz frequency response, and 125 dB SPL maximum output describe a system for wide-dispersion applications. The Link function can connect it to a STAGEPAS 1K MKII with a single cable when a stereo system is needed.
Strong match
Who this is for
- Wide-dispersion PA applications using one or more DXL1K speaker systems.
- Stereo PA setups that pair the DXL1K with a STAGEPAS 1K MKII through the Link function.
Consider the trade-offs
When to look elsewhere
- Setups that need a system other than a powered subwoofer with line-array speaker configuration.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
170° × 30° coverage
The system is specified for broad horizontal dispersion with a narrower vertical spread.
Detail 03
37 Hz–20 kHz frequency response (-10 dB)
This is the stated frequency-response range for the system.
Detail 04
125 dB SPL maximum output level
This is the listed peak maximum output measurement at 1 meter using IEC noise.
Final check
Know before you order
- 01Plan to use an outboard mixer with the DXL1K.
- 02For stereo use with a STAGEPAS 1K MKII, connect the units with a single cable using the Link function.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How is the DXL1K assembled?
Attach the line-array speaker to the top of the subwoofer cabinet.
02Can it be used in a stereo system?
Yes. It can link to a STAGEPAS 1K MKII with a single cable for stereo operation.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Line Array Speaker
- 8 ohms
- Frequency Response 10db
- 37Hz–20kHz
- Crossover Frequency
- 240Hz
2 detailsBody & build
- Color
- Red
- Type
- Powered subwoofer with a line array speaker
2 detailsConnections & power
- Power Consumption
- 25W (Idle), 91W (1/8 power)
- Maximum Output Level Measured Peak Iec Noise 1 M
- 125dB SPL
1 detailsSize & weight
- Weight
- 50.71
12 detailsOther
- Coverage Angle Horizontal X Vertical
- 170° x 30°
- 220v
- 50Hz
- 100v
- 50/60Hz
- 110 120v
- 60Hz,
- 110v 220v
- 60Hz
- Number of Mixing Channels
- 2
- Mono Mic Line
- 1
- Subwoofer
- 4 ohms
- Dynamic
- 1,100W (subwoofer: 500W, line array speaker: 600W)
- 220 240v
- 50/60Hz
- Mono Line
- 1
- 220 230v
- 60Hz
