Detail 01
90° × 60° coverage
The horn is designed to cover a 90° horizontal by 60° vertical area.
Product detailSKU #1500000479216
YamahaCXR12mk3 12" 1100W Passive Loudspeaker
1/4
Independent shopping perspective
The Korena take
Yamaha’s CXR12mk3 is a 12-inch, two-way passive loudspeaker built for portable or installed sound reinforcement. Its molded cabinet, side handles, and pole sockets support moving between transport, setup, and use, while the 52° monitor angle and symmetrical cabinet give it a stage-monitor role as well. The updated horn and port arrangement are designed for controlled coverage and low-frequency response. Two parallel SpeakON connections support system wiring, with rigging points available for installation.
Strong match
Who this is for
- Front-of-house, stage-monitor, or side-fill deployment in portable and installed sound-reinforcement systems.
- Pole-mounted coverage where a standard position or 7° downward angle suits the audience area.
- Mirrored stage-monitor placement using the cabinet’s symmetrical design.
Consider the trade-offs
When to look elsewhere
- Systems that require an active loudspeaker rather than a passive model.
- Installations without a suitable mounting approach for its rigging points or optional bracket.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 × SpeakON NL4MP parallel inputs
Two parallel SpeakON connections are provided for speaker-system wiring.
Detail 03
35 mm pole sockets at 0° or -7°
Choose a level cabinet position or a 7° downward tilt when pole mounting.
Detail 04
52° monitor angle
The cabinet can be positioned for stage-monitor use at a 52° angle.
Detail 05
51Hz–20kHz frequency range
The listed operating range extends from 51Hz to 20kHz.
Detail 06
34 lb weight
A pair of side handles supports carrying the 34 lb cabinet.
Final check
Know before you order
- 01This is a passive loudspeaker with an 8-ohm impedance.
- 02For Yamaha-system pairing, the description names PX Series amplifiers and CXSmk3 subwoofers.
- 03Optional accessories are the UB-DXRDHR12A bracket and SPCVR-DXR123 cover.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the CXR12mk3 be used as a stage monitor?
Yes. It has a 52° monitor angle, and its symmetrical cabinet supports mirrored monitor placement.
02What connections does it use?
It has two parallel SpeakON NL4MP inputs.
03Can it be pole mounted?
Yes. It has two 35 mm pole sockets for 0° or -7° positioning.
04What are the peak power and maximum SPL ratings?
Peak power is 1100W and peak SPL is 124dB SPL.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsSound
- Impedance
- 8 ohm
- Speaker Type
- 2-way bass-reflex
- High Frequency Driver
- 1.75 inch diaphragm, 1 inch throat compression driver
- Low Frequency Driver
- 12 inch cone, 2.5 inch voice coil
- Frequency Range
- 51Hz–20kHz
- Sensitivity
- 94dB SPL
3 detailsBody & build
- Body Finish
- Black
- Finish
- Black
- Cabinet Material
- Plastic
1 detailsConnections & power
- Inputs
- 2 × SpeakON NL4MP parallel
2 detailsSize & weight
- Weight
- 34
- Dimensions
- 14.4 inch × 23.6 inch × 13.8 inch
13 detailsOther
- Crossover
- 1.9kHz
- Optional Accessories
- UB-DXRDHR12A bracket, SPCVR-DXR123 cover
- Program
- 550W
- Rigging Points
- Top ×2, rear ×1 (M10), bottom ×2, side ×2 (M8)
- Noise
- 275W
- Model
- CXR12mk3
- Coverage
- 90° × 60°
- Peak SPL
- 124dB SPL
- Pole Mount
- 35 mm ×2, 0° or -7°
- Monitor Angle
- 52°
- Handle
- 2 side handles
- Peak
- 1100W
- Product Type
- Passive loudspeaker
