Detail 01
Band A frequency range: 476–500 MHz
This version operates within that specified frequency range.
Product detailSKU #1500000371074
SennheiserXSW IEM Wireless In-Ear Monitoring System - Band A
1/5
Independent shopping perspective
The Korena take
Sennheiser’s XSW IEM Band A system puts a transmitter, belt-or-strap bodypack receiver, ear buds, and rackmount kit into one wireless monitoring package. The rackmountable transmitter has an LED display and controls for 3-band EQ, a limiter, and Focus mode, so you can shape a monitor mix and raise one source within it. Band A operates across 476–500 MHz.
Strong match
Who this is for
- Stage monitoring where a performer needs a belt-worn wireless receiver and included ear buds.
- Rack-based monitor setups requiring EQ, limiting, and Focus control from the transmitter.
Consider the trade-offs
When to look elsewhere
- Use in locations where the 476–500 MHz Band A range is not appropriate.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
3-band EQ, limiter, and Focus mode
The transmitter provides bass, midrange, and treble adjustment, limiting, and single-source level increase.
Detail 03
Two AA batteries; approximately six hours of operation
The bodypack uses two 1.5V AA batteries; runtime varies with volume level.
Detail 04
Balanced AF inputs: two XLR/1/4-inch combo sockets
The transmitter provides two electronically balanced combo input sockets.
Final check
Know before you order
- 01Confirm that the 476–500 MHz Band A range suits your intended operating location.
- 02The bodypack receiver is powered by two 1.5V AA batteries.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What comes with the XSW IEM Band A system?
It includes a transmitter, bodypack receiver, ear buds, and rackmount kit.
02Can I adjust the monitor mix at the transmitter?
Yes. The transmitter includes 3-band EQ, a limiter, and Focus mode.
03What frequency range does Band A use?
Band A operates from 476–500 MHz.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
7 detailsSound
- Variant A Frequency Range
- 476–500MHz
- Frequency Response
- 40Hz–20kHz
- Variant C Frequency Range
- 662–686MHz
- Af Frequency Response
- 45Hz to 15kHz
- Variant B Frequency Range
- 572–596MHz
- Variant E Frequency Range
- 823.2–831.8MHz
- Nominal Impedance
- 6 ohm
1 detailsPickups & controls
- Switching Bandwidth
- Up to 24MHz
7 detailsConnections & power
- Af Input
- BAL AF IN L (I) + MONO/ BAL AF IN R (II) - 2x XLR 3 inch and 1/4 inch jack combo socket, electronically balanced
- Antenna Output Bnc Socket
- 50 ohm
- Nominal Voltage
- 3V battery
- Variant A B C and E Output Power
- 30mW
- Connector
- 1/8 inch stereo plug, gold-plated
- Power Supply
- 2 AA batteries, 1.5V
- Variant K Output Power
- 10mW
3 detailsSize & weight
- Cable Length
- 55.11 inch
- Weight Including Batteries
- Approx. 0.24 lb.
- Dimensions
- Approx. 3.54 inch x 2.75 inch x 1.02 inch
15 detailsOther
- Modulation
- FM stereo
- Nominal Peak Deviation
- ±15kHz/±24kHz
- SPL 1 KHZ 1 Mw
- 106dB
- Rf Modulation
- Wideband FM
- Af Signal to Noise Ratio Nbsp 1 Mv Peak Deviation
- - ≥88dB
- High Boost EQ
- +10dB at 13kHz
- Limiter
- -10dB
- Temperature
- –5 °C (23 °F) to +50 °C (122 °F)
- Temperature Range
- 0 °C to +40 °C
- Signal to Noise Ratio At Nominal Load and Peak Deviation
- ≥88dB
- Total Harmonic Distortion Thd
- ≤ 1%
- Variant K
- 925.2–937.3MHz
- Ie 4 in Ear Headphones Transducer
- Dynamic
- Cross Talk 50hz 10khz
- Typically 45dB
- Operating Time
- Approx. 6 hr. (depending on volume level)
