Audio-TechnicaATW-3255 3000 Series Wireless In-Ear Monitor System Black
Product overview
About this model
The Audio-Technica 3000 Series wireless in-ear monitor system was designed to bring professional sound quality and features to all levels of performers and performance venues. The 3000 Series wireless IEM provides an affordable, durable in-ear monitor system that is easy to use and, crucially, delivers high-quality sound with dependable RF. With design elements modeled after the popular 3000 Series UHF wireless microphone systems, the 3000 Series IEM features a rack-mount transmitter with front-panel controls and large OLED display, body-pack receiver with an efficient headphone amp (it also conveniently charges in the same ATH-CHG3 and ATH-CHG3N charging stations as the 3000 Series UHF body-pack transmitters) and ATH-E40 professional in-ear monitor headphones with propriety dual-phase push-pull drivers. Together, these elements provide clear, natural sound quality on any stage. The 3000 Series wireless IEM offers exceptional wide-band UHF coverage (138mHz), available in frequency band DF2 (470–608mHz), receiver antenna diversity to ensure RF stability and stereo or mono operation with pan/personal mix controls. Additional features include network monitoring and control via the Audio-Technica Wireless Manager software, a cue mode that allows an audio engineer to monitor several IEM channels from a single receiver, and a 3000 Link mode that enables compatibility with 3000 Series wireless microphone components. Mixing and performing on a smaller scale shouldn’t have to mean sacrificing sound quality. Through the 3000 Series Wireless In-Ear monitor system, Audio-Technica continues to deliver on its promise of making high-quality audio accessible to all.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Minimum Frequency Step
- 25kHz
- Frequency Response
- 40Hz–14,100Hz
- Rf Sensitivity
- 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
1 detailsBody & build
- Color
- Black
11 detailsConnections & power
- Headphone Output
- 40 mW (at 12 ohms)
- Input Connection
- XLR-F type x 2 (Pin1: GND, Pin2: Hot, Pin3: Cold)
- Output Connection
- 1/4 inch TRS x 2
- Battery Life
- 4–6 hours (alkaline), 5–7 hours (Ni-MH, 1900 mAh), 11–13 hours (Lithium)
- Antenna Input
- SMA type, 50 ohms
- Rf Output Power
- High of 50mW, low of 10 mW (switchable) at 50 ohms
- Antenna Output
- BNC-type, 50 ohms
- Network Port
- RJ-45
- Headphone Output Jack
- 1/8 inch TRS stereo mini-jack
- Power Supply
- 100V to 240V AC (50/60Hz) to 12VDC 1 A (center positive) switched mode external power supply
- Maximum Input Level
- XLR-F type +24 dBu (at 0dB sensitivity)
3 detailsSize & weight
- Dimensions Wxdxh
- 2.5 inch x 0.91 inch x 3.2 inch
- Weight Without Batteries
- 0.225 lb.
- Weight Without Accessories
- 2.437 lb.
1 detailsIn the box
- Included Accessories
- ATH-E40
15 detailsOther
- Operating Frequencies Band Df2
- 470.125 to 607.875mHz
- EQ High
- 6kHz/8kHz/10kHz/±9dB in 3dB step
- Nominal Peak Deviation
- ±34kHz nominal/±45kHz peak
- Operating Temperature Range
- -5℃ to +45℃ (23℉ to 113℉)
- Image Rejection
- >80dB, typical
- Network
- 100BASE-T
- Operating Range
- 300' (in open range environment with no interfering signals)
- Limiter
- Selectable -30dB to OFF (0dB) in 6dB steps
- Total Harmonic Distortion
- <0.2% (at 1kHz, +4dBu input)
- Receiving System
- Antenna diversity
- Modulation Mode
- FM
- Batteries
- 3 VDC (two 1.5 V AA) (not included)
- Dynamic Range
- >90dB, A-weighted, typical
- Maximum Simultaneous Use Recommended
- 49 channel per band
- EQ Low
- 80Hz/160Hz/320Hz/±9dB in 3dB step
