Detail 01
Cable outer diameter: 3.5–8.0 mm
Sets the stated cable-size range for the connector.
Product detailSKU #1373298415794
RapcoNeutrik XX-Series XLR 3-Pin Inline Connector Gold contacts Female
1/8
Independent shopping perspective
The Korena take
The XX-Series female XLR connector is a 3-pin inline option for cable assembly. It supports cable outer diameters from 3.5 to 8.0 mm and conductors up to 14 AWG, with a latch lock and a POM strain-relief component. Its listed mating life exceeds 1,000 cycles, giving you clear published limits to check when selecting parts for a cable build.
Strong match
Who this is for
- Selecting a 3-pin inline XLR connector for cable builds using wire no larger than 14 AWG.
Consider the trade-offs
When to look elsewhere
- Cable builds using wire over 14 AWG or cable outer diameter beyond 8.0 mm.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Maximum wire size: 14 AWG
Sets the largest listed conductor size for the cable build.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What cable diameter range is specified?
The specified cable outer diameter range is 3.5 to 8.0 mm.
02What is the maximum wire size?
It supports wire up to 14 AWG.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Gray
1 detailsConnections & power
- Rated voltage
- 50V
28 detailsOther
- Rated current per contact
- 16 A
- Contact resistance
- ‰¤ 3 mÎ (inner)
- Insert
- Polyamide (PA 6.6 30 % GR)
- Boot
- Polyurethane
- Solderability
- Complies with IEC 68-2-20
- Capacitance between contacts
- ‰¤ 4 pF
- Shell
- Zinc die-cast (ZnAl4Cu1)
- Tier
- new
- Protection class
- IP 40
- Contact plating
- 2 m Ag
- Temperature range
- -30 C to +80 C
- Locking device
- Latch lock
- Standard compliance
- IEC 61076-2-103
- Category Source
- detail
- Dielectric strength
- 1.5 kVdc
- Insertion force
- ‰¤ 20 N
- Wire size
- max. 14 AWG
- Insulation resistance
- > 10 GÎ (initial)
- Withdrawal force
- ‰¤ 20 N
- Korena Special
- false
- Shell plating
- Nickel
- Lifetime
- > 1000 mating cycles
- Contacts
- Bronze (CuSn8)
- Locking element
- Zinc die-cast (ZnAl4Cu1) / Ck 67 (spring)
- Strain relief
- Polyacetal (POM)
- Cable O.D.
- 3.5 - 8.0 mm
- Flammability
- UL 94 HB
- Source Id
- site51373298415794
Worth comparing
1 of 12
More from Rapco
1 of 8
