Detail 01
Solder contacts
The connector is specified for solder-contact wiring.
Product detailSKU #1373298415806
RapcoNeutrik XX-Series XLR 5-Pin Inline Connector Silver Contacts Male
Sale
1/8
Independent shopping perspective
The Korena take
For a five-pin XLR cable assembly, the XX-Series male inline connector uses solder contacts and supports wire up to 18 AWG. Its listed cable outer-diameter range is 3.5 to 8.0 mm. A latch lock and POM strain-relief component are part of the design, while the published mating life exceeds 1,000 cycles and the specified temperature range runs from -30 C to +80 C.
Strong match
Who this is for
- Building a five-pin XLR cable with solder wiring, 18 AWG maximum wire, and 3.5–8.0 mm cable diameter.
Consider the trade-offs
When to look elsewhere
- Cable builds using wire over 18 AWG or cable outer diameter beyond 8.0 mm.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Cable outer diameter: 3.5–8.0 mm
Sets the stated cable-size range for the connector.
Detail 03
Maximum wire size: 18 AWG
Sets the largest listed conductor size for the cable build.
Final check
Know before you order
- 01Plan for solder-contact wiring when assembling the cable.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many pins does this connector have?
It is a 5-pin male XLR inline connector.
02How is it wired?
It uses solder contacts.
03What cable diameter range is specified?
The specified cable outer diameter range is 3.5 to 8.0 mm.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
1 detailsConnections & power
- Rated voltage
- 50V
29 detailsOther
- Rated current per contact
- 7.5 A
- Contact resistance
- ‰¤ 3 mÎ (inner)
- Insert
- Polyamide (PA 6.6 30 % GR)
- Boot
- Polyurethan
- Solderability
- Complies with IEC 68-2-20
- Wiring
- Solder contacts
- Capacitance between contacts
- ‰¤ 7 pF
- Shell
- Zinc die-cast (ZnAl4Cu1)
- Tier
- new
- Protection class
- IP 40
- Contact plating
- 2 m Ag over 2 m Ni
- Temperature range
- -30 C to +80 C
- Locking device
- Latch lock
- Standard compliance
- IEC 61076-2-103
- Category Source
- detail
- Dielectric strength
- 1.5 kVdc
- Insertion force
- ‰¤ 20 N
- Wire size
- max. 18 AWG
- Insulation resistance
- > 10 GÎ (initial)
- Withdrawal force
- ‰¤ 20 N
- Korena Special
- false
- Shell plating
- Nickel
- Lifetime
- > 1000 mating cycles
- Contacts
- Brass (CuZn39Pb3)
- Locking element
- Zinc die-cast (ZnAl4Cu1)
- Strain relief
- Polyacetal (POM)
- Cable O.D.
- 3.5 - 8.0mm
- Flammability
- UL 94 HB
- Source Id
- site51373298415806
Worth comparing
1 of 12
More from Rapco
1 of 8
