Detail 01
2-way
Splits each channel into two outputs, low and high. One crossover point per channel, not two.
Product detailSKU #1274034485742
NadyCX-22SW 2-Way Stereo Crossover
1/3
Independent shopping perspective
The Korena take
A stereo 2-way crossover for splitting a signal into high and low bands before the power amps. For biamped PA or studio monitor rigs.
Strong match
Who this is for
- Biamping a PA: sub gets lows, tops get highs
- Feeding a subwoofer amp from a full-range mix
- Two-channel stereo rigs needing matched left/right splits
Consider the trade-offs
When to look elsewhere
- Anyone using powered speakers with crossovers already built in
- Players wanting an instrument effect — this is not a pedal
- Three-band setups needing a separate mid amp
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Stereo
Two independent channels, so left and right split identically. Runs one channel of a 4-way rig if needed.
Detail 03
Crossover, not a processor
It divides frequencies and sends them to separate amps. It does not amplify, limit, or add effects.
Detail 04
$132 price point
Entry-tier signal gear. Fine for a small PA or practice rig; large touring systems use DSP units instead.
Final check
Know before you order
- 01Needs a separate power amp for every output band you use
- 02Confirm your speakers' crossover point before setting it
- 03Cables not included — count how many runs your rig needs
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this power my speakers?
No. A crossover works at line level, between your mixer and your amps. Each output band still needs its own amplifier channel.
02Do I need this if I have powered speakers?
Usually not. Most powered speakers and subs handle the split internally, and stacking two crossovers doubles the filtering.
03Can I use it as a guitar pedal?
No. It is rack-and-PA signal gear running at line level, not an instrument effect.
04How many amps do I need for a stereo setup?
Four amplifier channels — low and high for left, low and high for right. Two stereo power amps cover it.
