Detail 01
SoundCheck DSP with Flat, DJ, Live, and Wedge modes
Select a voicing mode matched to playback, live use, or monitor placement.
Product detailSKU #1500000479355
MackieThump12v4 12" Powered Loudspeaker
1/5
Independent shopping perspective
The Korena take
Mackie’s Thump12v4 is a powered 12-inch loudspeaker for live sound, DJ playback, and monitor duties. Its 1400W Class-D amplifier, 129dB peak SPL, 12-inch woofer, and 1-inch compression driver are paired with SoundCheck DSP for quick setup choices. Select Flat, DJ, Live, or Wedge voicing, then use the onboard mixer for microphones, instruments, or playback. Bluetooth supports streaming, wireless linking, and control through the Thump Connect 2 app; its cabinet can go on the floor, a pole, or M10 fly points.
Strong match
Who this is for
- Running microphones, instruments, and playback sources from the loudspeaker’s onboard mixer.
- Using one cabinet for pole-mounted sound reinforcement and 40-degree floor-monitor placement.
- Streaming playback or wirelessly linking two speakers for stereo or zone configurations.
Consider the trade-offs
When to look elsewhere
- Installations requiring a response below the rated 39Hz–20kHz range at -10dB.
- Users needing more than the speaker’s two XLR/TRS combo inputs plus auxiliary and Bluetooth inputs.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 XLR/TRS combo inputs, 1/8-inch TRS input, Bluetooth, and XLR mix output
Connect multiple source types and pass the mix to another speaker or system.
Detail 03
Bluetooth 5.0 streaming and control
Streams audio, supports wireless speaker linking, and works with the Thump Connect 2 app.
Detail 04
Floor, pole, or M10 fly mounting; 40-degree monitor angle
The cabinet supports several placement approaches, including wedge monitoring.
Detail 05
Peak/RMS limiting and thermal protection
Includes limiting and thermal-protection circuitry.
Final check
Know before you order
- 01The cabinet weighs 27.5.
- 02Power input is 100–240V AC, 50/60Hz through an IEC 3-pin connector.
- 03A power cable and quick-start guide are included.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the Thump12v4 be used as a stage monitor?
Yes. It has a 40-degree monitor angle and a Wedge voicing mode.
02Can I connect microphones directly?
Yes. Its two XLR/TRS combo inputs have mic/line switching.
03Can two speakers link wirelessly?
Yes. Bluetooth supports wireless linking for stereo or zone configurations.
04What is the maximum SPL?
129dB peak.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSound
- Frequency Response 3db
- 47Hz–20kHz
- Crossover Frequency
- 1.8kHz
- High Frequency Driver
- 1 inch compression driver
- Low Frequency Driver
- 12 inch woofer (ferrite)
- Frequency Response 10db
- 39Hz–20kHz
10 detailsConnections & power
- Inputs
- 2 × XLR/TRS combo, 1 × 1/8 inch TRS, Bluetooth
- Peak Power
- 1400W
- Output
- 1 × XLR mix out
- Input Voltage
- 100–240V AC, 50/60Hz
- Input Impedance
- 10 kohm
- Output Impedance
- 150 ohm
- Power Consumption
- 300W
- Power Connector
- IEC 3-pin
- Hf Power
- 200W
- Lf Power
- 1200W
2 detailsSize & weight
- Weight
- 27.5
- Dimensions
- 24.4 inch × 14.0 inch × 14.0 inch
1 detailsIn the box
- Included Accessories
- power cable, quick start guide
12 detailsOther
- DSP
- SoundCheck DSP
- Voicing Modes
- Flat, DJ, Live, Wedge
- Protection
- Peak/RMS limiting, thermal protection
- Model
- Thump12v4
- Amplifier Type
- Class-D
- Coverage
- 140° × 60°
- Monitor Angle
- 40°
- Maximum SPL
- 129dB peak
- Product Type
- Powered loudspeaker
- Bluetooth
- Version 5.0 (audio streaming and control)
- Mounting
- Floor, pole mount, or fly (M10 points)
- Cooling
- Convection
