Detail 01
Right-angle 3.5 mm plug
Sits flat against a phone or laptop instead of standing proud, so the jack takes less strain in a bag or on a stand.

Independent shopping perspective
A short cable that takes a 3.5 mm output from a phone or laptop into an XLR input on a mixer or powered speaker.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Sits flat against a phone or laptop instead of standing proud, so the jack takes less strain in a bag or on a stand.
Detail 02
Mates with a female XLR input — a mixer channel or powered speaker input. It will not plug into an XLR output.
Detail 03
Device-to-input length. Plan on the phone or laptop being within arm's reach of the mixer.
Detail 04
A stereo source arrives at a single mono input. Do not expect a proper stereo image at the far end.
Detail 05
Nothing to rewire or adapt. If you need a different connector later, you need a different cable.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, that is the usual target. Turn the gain well down first, since a phone or laptop output is much hotter than a microphone.
No. Everything lands on one XLR connection, so treat it as a mono feed into a single channel.
No. The XLR end is male, so it plugs into inputs, not into a microphone body, and it is not wired for that direction.
Only if your device sits beside the mixer or speaker. For anything across a stage you need a longer cable.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.