Detail 01
Right-angle 3.5mm plug
Sits flat against a phone or laptop instead of sticking straight out, so it survives being bumped.
Product detailSKU #1316478171187
HosaXVM-101M Stereo 3.5mm Male TRS Right-Angle to XLR Male Microphone Patch Cable 1 ft.
Independent shopping perspective
The Korena take
A one-foot patch cable that takes a 3.5mm stereo output into a single XLR male input. For sending phone or laptop audio to a mixer.
Strong match
Who this is for
- Feeding phone or laptop backing tracks into a mixer XLR input
- Short hops between a device and a nearby stage box
- Tight rack or pedalboard spots where a long cable gets in the way
Consider the trade-offs
When to look elsewhere
- Anyone needing true stereo — two channels collapse into one XLR
- Runs longer than a foot; this reaches almost nothing
- Connecting a mic, since XLR here is male output only
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Stereo TRS on one end, XLR on the other
The two channels merge into one XLR line. Anything panned hard still comes through, but as mono.
Detail 03
XLR male
Plugs into a female XLR input on a mixer or stage box. It is an output, not a mic connection.
Detail 04
1 ft. length
Device and input must be side by side. Plan on an XLR extension for any real distance.
Final check
Know before you order
- 01One foot only — budget an XLR cable to reach the mixer
- 02Output is mono; use two cables and a splitter for stereo
- 03Set the mixer channel to line, not mic, to avoid overload
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this give me stereo into my mixer?
No. The stereo 3.5mm signal is combined onto a single XLR, so it arrives mono. Use two separate paths if you need both channels.
02Can I plug my phone into a mixer with this?
Yes, if the mixer has an XLR input. The 3.5mm end goes in the headphone jack, the XLR into the channel.
03Is one foot really enough?
Only if the device sits right at the input. Most people add a standard XLR cable to cover the distance.
04Can I use it to connect a microphone?
No. The XLR end is male, which means it is an output. It plugs into an input, not a mic.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
