Detail 01
XLR female to 3.5mm TRS male
Plugs into a microphone's output on one end and a small mic input jack on the other.

Independent shopping perspective
A 15-foot adapter cable that takes an XLR mic output into a 3.5mm input. For recording into a camera, phone interface, or computer jack.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Plugs into a microphone's output on one end and a small mic input jack on the other.
Detail 02
The plug turns flat against the device, so it clears camera bodies and reduces strain on the jack.
Detail 03
Enough to let a mic on a stand reach a camera or recorder without a stand-mounted rig.
Detail 04
Carries the low signal from a mic, not a line or instrument signal — levels will be wrong elsewhere.
Detail 05
The three-conductor plug fits standard stereo mic jacks on cameras and computers.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, if the camera has a 3.5mm microphone input. The right-angle plug is shaped to sit flat against the camera body.
No. There is no phantom power over this cable. Use a dynamic mic, or a condenser with its own battery or powered source.
No. This is XLR to 3.5mm at mic level. A guitar uses a 1/4 inch plug and a different signal level.
No. 15 feet is a normal working length and leaves slack between a mic stand and your recorder or camera.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.