Detail 01
2-1/16" (52.73mm) E-to-E spacing
Measured outer string to outer string. Wrong spacing puts strings off the fretboard edge, so measure your bridge first.

Independent shopping perspective
Replacement saddle set for Strat and Tele bridges on 2-1/16" string spacing. For players fighting string breakage or tuning slip at the saddle.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Measured outer string to outer string. Wrong spacing puts strings off the fretboard edge, so measure your bridge first.
Detail 02
Sets the starting point for your action. Height screws adjust from here, not from zero.
Detail 03
Governs intonation screw travel. Matches standard vintage-style Strat and Tele bridge plate slots.
Detail 04
Determines whether adjacent saddles sit flush without binding in the bridge plate.
Detail 05
Cosmetic only. Pairs with black hardware; will stand out against chrome or nickel bridge plates.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Measure center of low E to center of high E at the saddles. If it reads about 52.7mm, this is your set. Many Fender bridges use narrower spacing.
No. This is a six-saddle set. Three-barrel Tele bridges need a different design.
Yes. Saddle position resets during the swap, so check intonation at the 12th fret and adjust each screw.
Yes, it installs on standard six-saddle Strat trem bridges with matching spacing.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.