Korena
Product detailSKU #1303152052993

Graph TechPS-8000-F0 String Saver Originals Strat & Tele 2-3/16" Spacing

Graph Tech
Graph Tech PS-8000-F0 String Saver Originals Strat & Tele 2-3/16" Spacing
1/3

Independent shopping perspective

The Korena take

Graph Tech String Saver Originals in the wider 2-3/16" spacing, for Strat and Tele bridges. Replacement saddles for modern-spec six-saddle bridges.

Graph Tech PS-8000-F0 String Saver Originals Strat & Tele 2-3/16" Spacing product detail
Product studyGraph Tech PS-8000-F0 String Saver Originals Strat & Tele 2-3/16" Spacing
Graph Tech PS-8000-F0 String Saver Originals Strat & Tele 2-3/16" Spacing alternate view
Alternate view

Strong match

Who this is for

  • Modern Strats and Teles measuring roughly 2-3/16" across the outer strings
  • Replacing saddles notched or grooved from string wear
  • Guitars where strings keep snapping at the saddle

Consider the trade-offs

When to look elsewhere

  • Vintage-spec bridges on 2-1/16" spacing — order that version instead
  • Two- or three-saddle Tele bridges
  • Players who want zero setup work after the swap

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

2.179" (2-3/16") E-to-E

The wider of the two common spacings. Strings sit further apart at the bridge, closer to the fretboard edges.

Detail 02

0.820" saddle length

Front-to-back dimension, which sets how far each saddle can travel for intonation on the bridge screws.

Detail 03

0.440" saddle width

Side-to-side width per saddle. Six of these lined up are what produce the 2-3/16" total spread.

Detail 04

0.230" saddle height

Starting height off the plate. Determines where your action lands before you touch the height screws.

Detail 05

Strat and Tele fitment

Made for six-saddle bridge plates. Vintage three-barrel Tele bridges use a completely different saddle.

Final check

Know before you order

  1. 01Measure high-E to low-E string centers at the bridge first; 2-3/16" is the wider spec
  2. 02Saddles only — reuse your existing height and intonation screws and springs
  3. 03Budget time for a restring and intonation reset

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How is this different from the 2-1/16" version?

String spacing at the bridge. This one is wider, matching modern-spec bridges. Everything else about the saddle format is the same.

02Will these fit a vintage three-saddle Tele bridge?

No. These are individual saddles for six-saddle bridge plates. A three-barrel Tele bridge needs a different part entirely.

03Do I get all six saddles?

Yes, a full set for a six-string bridge at 2-3/16" spacing.

04Do I need to re-intonate after installing?

Yes. Any saddle change shifts the string break point, so set intonation with fresh strings and check action afterward.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
SSS
1 detailsBody & build
Body Shape
Stratocaster
1 detailsSize & weight
Dimensions Lxwxh
0.820 inch x 0.440 inch x 0.230 inch
1 detailsOther
E to E
2.179 inch

Worth comparing

More from Graph Tech