Detail 01
2-1/16" string spacing
Measured outer string center to outer string center at the bridge. The narrower of the two common Strat specs.
Product detailSKU #1303152052988
Graph TechSupercharger Kit Strat 2 1/16" spacing
Independent shopping perspective
The Korena take
A Graph Tech upgrade kit cut for Strat-style bridges on 2-1/16" string spacing. For players redoing a vintage-spec Strat's contact points in one go.
Strong match
Who this is for
- Vintage-spec Strat bridges measuring 2-1/16" between outer string centers
- Players wanting one part number instead of sourcing pieces separately
- SSS Strats with a standard six-saddle bridge plate
Consider the trade-offs
When to look elsewhere
- Strats on wider 2-3/16" spacing — saddles will sit wrong
- Anyone unwilling to restring and reset intonation afterward
- Hardtail or non-Strat bridges with different saddle footprints
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
7/32" saddle height
Sets how far the height screws start out. Roughly matches stock Strat saddles, so your action stays in range.
Detail 03
1/8" saddle thickness
Width of each saddle side to side. This is what fixes the string-to-string spacing once six sit in the plate.
Detail 04
Strat body shape, SSS
Cut for the six-saddle Strat bridge plate. Won't drop into Tele ashtray, Gibson, or import bridges without checking.
Detail 05
Sold as a kit
Parts arrive matched to one spacing standard, so you aren't mixing spacings across the guitar's contact points.
Final check
Know before you order
- 01Measure your existing bridge outer-string-center to outer-string-center before ordering — 2-1/16" or 2-3/16"
- 02Plan on fresh strings; you cannot swap saddles with the old set on
- 03Intonation and action need resetting after installation
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I know if I need 2-1/16" or 2-3/16"?
Measure at the bridge, center of the high E string to center of the low E. Vintage-style Strats are usually 2-1/16"; many modern ones are 2-3/16".
02Will this fit my Tele?
This kit is cut for the Strat six-saddle bridge. Tele bridges use different saddle geometry, so check your bridge type first.
03Do I need special tools?
A screwdriver for the saddle and height screws, string winder, and a tuner for resetting intonation afterward. Nothing specialized.
04Can I install this myself?
It's a straightforward parts swap if you're comfortable restringing and setting intonation. Otherwise a tech can do it in a short bench visit.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SSS
1 detailsBody & build
- Body Shape
- Stratocaster
2 detailsSize & weight
- Length
- 1-11/16 inch (42.93mm)
- Height
- 7/32 inch (5.33mm)
1 detailsOther
- Thick
- 1/8 inch (3.35mm)
