Detail 01
6mm posts
Fits headstock holes bored to 6mm. Measure your existing hole before ordering — post diameter is not adjustable.

Independent shopping perspective
Chrome tuner upgrade kit for guitars with 6mm mounting posts. For players fighting tuning slip on a guitar that's otherwise fine.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Fits headstock holes bored to 6mm. Measure your existing hole before ordering — post diameter is not adjustable.
Detail 02
Bright silver. Matches chrome bridges and jack plates; will look off next to gold or black hardware.
Detail 03
The footprint on the headstock face. Check against your current tuner plates so old screw holes stay hidden.
Detail 04
How far the housing stands off the headstock. Low enough that it won't foul most cases or gig bags.
Detail 05
Baseplate depth. Thin plates sit flush; thick headstock finish edges can leave a small gap.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
Only if the headstock holes are 6mm. Many modern Fenders use 10mm vintage or 8mm bushings. Measure the hole, not the string post, before ordering.
Not for the posts if yours are already 6mm. Mounting screw holes may not match your old tuners, in which case plugging and redrilling is needed.
No. Chrome is brighter and cooler-toned. Next to aged nickel hardware the difference is visible, especially on the headstock where both sit in one plane.
Only if the tuners are the cause. Binding at the nut, bad string winds, or a worn tremolo will keep slipping tune regardless of what tuners you install.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.