Detail 01
E-to-E spacing 2-1/16 in (52.73mm)
Total string spread across all six saddles. Measure your outer string centers first; a mismatch pushes strings toward the fretboard edge.
Product detailSKU #1274115045850
Graph TechPRS String Saver Saddles (Set of 6)
Independent shopping perspective
The Korena take
A six-piece replacement saddle set for PRS-style bridges. For owners swapping out worn or rattling stock saddles on a hardtail or trem PRS.
Strong match
Who this is for
- PRS owners replacing pitted or worn stock saddles
- Players who break strings at the saddle repeatedly
- Anyone rebuilding a PRS bridge with matched intonation hardware
Consider the trade-offs
When to look elsewhere
- Fender or Gibson-style bridges — the footprint will not fit
- Players wanting a tone change; saddles alter feel more than voice
- Anyone unwilling to reset intonation after installation
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Saddle length 13/16 in (20.7mm)
Front-to-back travel envelope. If your bridge plate slots are shorter, the saddle will bind before intonation is set.
Detail 03
Thickness 13/32 in (10.41mm)
Individual saddle width. This is what sets per-string spacing, so it has to match your existing saddles closely.
Detail 04
Height 7/32 in (5.21mm)
Base height before the height screws. Determines how low your action can go and whether the neck angle still works.
Detail 05
Set of 6
Full string complement, so all six saddles wear and behave the same. No mixing old and new materials across the bridge.
Final check
Know before you order
- 01Measure your current saddles in all three dimensions before ordering
- 02Intonation and action must be reset after the swap
- 03Bridge screws, springs and height screws are not included
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit my PRS?
They are cut to PRS dimensions with 2-1/16 inch outer string spacing. PRS bridge designs have varied over the years, so compare your existing saddles to the listed measurements before ordering.
02Do I need a tech to install these?
Installation is straightforward, but you will need to reset intonation and string height afterward. If you do not own a tuner and feeler gauges, a tech visit is worth it.
03Will this change my tone?
Expect a change in attack and sustain characteristics rather than a different voice. The bigger practical gain is smoother string travel at the break point.
04Are the height and intonation screws included?
This is the saddle set only. Reuse the screws and springs from your existing saddles, and keep them organized so each saddle goes back to the same string position.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- HH
1 detailsPlayability
- E String to E String
- 2-1/16 inch, (2.076 inch), (52.73mm)
2 detailsSize & weight
- Length
- 13/16 inch, (0.815 inch), (20.7mm)
- Height
- 7/32 inch, (0.205 inch), (5.21mm)
1 detailsOther
- Thickness
- 13/32 inch, (0.41 inch), (10.41mm)
