Detail 01
16.75 in. rail-to-rail depth
Your deepest unit must fit inside this. Measure from the faceplate to the rear connectors, cables included.
Product detailSKU #1274228064396
GatorGRR-4L Rolling ATA-Style Deluxe Rack Case
1/9
Independent shopping perspective
The Korena take
Rolling 4-space ATA-style rack case with 16.75 in. rail depth. For anyone moving a small rack of gear to gigs regularly.
Strong match
Who this is for
- Transporting a wireless system or small mixer rack to gigs
- Rolling gear across parking lots instead of carrying 17 lbs
- Rack setups needing shock protection in a van or trailer
Consider the trade-offs
When to look elsewhere
- Deep amps or power sections needing more than 16.75 in.
- Anyone with more than four rack spaces of gear
- Studio-only racks that never leave the room — a cheaper shelf works
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
19 in. front rail to rear lid
Extra depth behind the rear rail for cable slack and plug bodies.
Detail 03
2.25 in. lid depth
Clearance in front of the rack ears for knobs and protruding faceplate hardware.
Detail 04
17 lb empty
Loaded with four rack units this gets substantial. The wheels do real work here.
Detail 05
ATA-style build
Recessed hardware and reinforced corners survive being stacked and slid in a trailer.
Final check
Know before you order
- 01No rack screws or gear included — this is the case only
- 02Measure your deepest unit before ordering; 16.75 in. is the working limit
- 03Empty case is 17 lbs before you add anything
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many rack spaces?
Four. The 21.5 in. exterior height accounts for the lids and rail frame around those spaces.
02Will a power amp fit?
Only if it's under 16.75 in. rail to rail. Many touring power amps are deeper — check yours before ordering.
03Do the lids come off?
ATA-style rack cases use removable front and rear lids for access on both sides while the rack stays loaded.
04Is it airline checkable?
It's ATA-style construction built for road transport. Check current airline size and weight limits before flying.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSize & weight
- Weight
- 17
- Interior Lid Depth
- 2.25 inch
3 detailsOther
- Exterior
- 10.75 inch x 21.5 inch x 22.75 inch
- Interior Front Rail to Rear Lid
- 19 inch
- Interior Front Rail to Rear Rail Distance
- 16.75 inch
