Detail 01
12 inch front rail to rear rail
Your deepest unit must fit inside that span. Measure chassis depth, not faceplate width.
Product detailSKU #1274228064508
GatorGR ATA Shallow Rack Case 4 Space
1/9
Independent shopping perspective
The Korena take
Four-space ATA-style rack case with a shallow 12 inch rail-to-rail depth. For rack gear that is short front to back.
Strong match
Who this is for
- Touring racks of preamps, wireless receivers and short effects units
- Players who want ATA-style protection without hauling a deep case
- Fly dates or small cars where a full-depth rack won't fit
Consider the trade-offs
When to look elsewhere
- Deep gear like power amps or long-chassis processors
- Anyone racking equipment that needs rear rail support past 12 inches
- Users who need a lot of cable slack behind the units
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
14.25 inch front rail to rear lid
You get about two extra inches behind the rear rail for power cables and connector bends.
Detail 03
4 rack spaces
Seven inches of vertical rack height. A single-space unit leaves three open, so plan blanks or a fan.
Detail 04
10 pound empty weight
Light enough for one person to carry loaded with a couple of light units, unlike plywood road racks.
Detail 05
2.25 inch lid depth
Shallow lids. Knobs, meters and protruding faceplate handles need to clear that when closed.
Detail 06
8.25 x 22 x 16.75 inch exterior
Fits a car trunk or hatch. Check this against your vehicle before you assume a rack travels easily.
Final check
Know before you order
- 01Measure the chassis depth of every unit against the 12 inch rail span
- 02Rack screws and gear are not included
- 03Front-to-rear-lid clearance is 14.25 inches — deep power connectors eat into that
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How deep is the usable rack space?
Twelve inches between the front and rear rails, with 14.25 inches from the front rail to the rear lid. Gear deeper than 12 inches will not mount to both rails.
02Will a power amp fit?
Most power amps run deeper than 12 inches, so plan on no. This shallow case suits preamps, wireless receivers and short-chassis units.
03How much gear does 4 spaces hold?
Four single-space units, or fewer taller ones. Four spaces equals seven inches of rack height.
04How heavy is it?
Ten pounds empty. Add your gear on top of that when judging whether one person can carry it loaded.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSize & weight
- Weight
- 10
- Interior Lid Depth
- 2.25 inch
3 detailsOther
- Exterior
- 8.25 inch x 22 inch x 16.75 inch
- Interior Front Rail to Rear Lid
- 14.25 inch
- Interior Front Rail to Rear Rail Distance
- 12 inch
