Korena
Product detailSKU #1275425411047

FurmanPST-8 Power Station Series AC Power Conditioner

Furman
Furman PST-8 Power Station Series AC Power Conditioner
1/2

Independent shopping perspective

The Korena take

Rack-mount 8-outlet power conditioner with filtering and over-voltage shutdown. For players and studios with a rack of gear to protect.

Furman PST-8 Power Station Series AC Power Conditioner product detail
Product studyFurman PST-8 Power Station Series AC Power Conditioner

Strong match

Who this is for

  • Rack rigs where amp, effects and wireless share one feed
  • Studios chasing hum and hiss out of the signal chain
  • Touring gear plugged into unknown venue power

Consider the trade-offs

When to look elsewhere

  • A single amp on a stable home circuit
  • Anyone needing battery backup through a power cut
  • Pedalboards — this is 17.75 inches wide, rack depth

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

8 linearly filtered outlets

Each outlet gets filtering, so one noisy device is less able to push hash into the others.

Detail 02

Extreme Voltage Shutdown above 135 VAC

Cuts power to your gear if line voltage spikes high, instead of passing it downstream.

Detail 03

>40 dB noise attenuation, 150 kHz–100 MHz

Knocks down RF and dimmer buzz riding on the AC line — the usual source of rack hum.

Detail 04

Needs a 15-amp input circuit

Everything downstream draws through one 15A feed. Big power amps can push that limit.

Detail 05

2.75 x 3.75 x 17.75 inches

Rack-width chassis. Measure your rack depth and rear clearance before ordering.

Detail 06

6W draw for display and control

Its own circuitry sips power independent of load, so idle draw stays negligible.

Final check

Know before you order

  1. 01Add up the draw of everything you'll plug in against the 15-amp input
  2. 02This conditions and protects power — it does not provide backup runtime
  3. 03Confirm rack rails and rear depth clear a 17.75-inch chassis

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this get rid of my amp hum?

It removes noise riding on the AC line — RF, dimmer buzz, switching hash. It won't fix ground loops between devices or a noisy single-coil pickup.

02Is this a battery backup?

No. It filters and protects power. If the wall power drops, your gear drops with it.

03How many things can I plug in?

Eight, through eight linearly filtered outlets, within a 15-amp total input capacity.

04What happens during a voltage spike?

Above 135 VAC, extreme voltage shutdown cuts power to connected gear rather than passing the surge through.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsConnections & power
Extreme Voltage Shutdown
(EVS) (>135 VAC)
Power Consumption
6W for display and control circuits independent of actual load
1 detailsSize & weight
Dimensions Hxwxd
2.75 inch x 3.75 inch x 17.75 inch
4 detailsOther
AC Current Capacity
Input - 15 amps capacity required
Safety Agency Listing
C-UL (UL standard #1449, #1363)
AC Noise Attenuation
Transverse (Differential) Mode: > 40 dB from 150 kHz - 100 MHz > 80dB from 100 kHz - 1GHz
Outlets
8 linearly filtered outlets

Worth comparing

More from Furman