Detail 01
45 dB maximum gain at 1 kHz
Provides a defined upper range for front-panel gain adjustment.
Product detailSKU #1500000357141
ArtDJPRE-LE Limited Edition DJ Phono Preamplifier
1/3
Independent shopping perspective
The Korena take
Built to place a turntable in a DJ, recording, stereo, or PA signal path, the DJPRE-LE combines RIAA phono equalization with hands-on gain adjustment. Its front-panel clip indicator gives you a clear reference while setting the level. Choose 100 pF or 200 pF input capacitance for the connected phono cartridge, and engage the low-cut filter when rumble or very low-frequency noise needs attention. Stereo RCA outputs keep connection to the next device straightforward in a compact aluminum housing.
Strong match
Who this is for
- Connecting a turntable to a recording device, audio workstation, home stereo, or PA system.
- Setting phono gain from the front panel while monitoring the signal clip indicator.
- Addressing rumble and low-frequency noise with the switchable low-cut filter.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100 pF or 200 pF input capacitance
Lets you select one of two capacitance settings for the phono-cartridge input.
Detail 03
Switchable low-cut filter, -3 dB at 22 Hz
Targets rumble and low-frequency noise below the filter point.
Detail 04
Stereo RCA line outputs
Connects to RCA-equipped recording, stereo, or PA equipment.
Detail 05
1.85 x 4.6 x 4.5 inches
Keeps the preamp compact for transport or placement in a setup.
Final check
Know before you order
- 01The turntable and destination device connect through RCA connections.
- 02Power requirements are 7–12 V DC or 9–12 V AC at 150 mA.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does it have a rumble filter?
Yes. Its switchable low-cut filter is rated -3 dB at 22 Hz and is intended to remove rumble and low-frequency noise.
02Can I adjust the input level?
Yes. A front-panel gain control and signal clip indicator are provided for gain adjustment.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 10Hz -50KHz, +/-.5dB
4 detailsConnections & power
- Maximum Output Level
- +6dBu (1.4Vrms)
- Input Impedance
- 47k Ω in Parallel with Either 100pF or 200pF
- Power Requirements
- 7-12V DC or 9-12V AC @150mA
- Maximum Input Level
- 40mVrms @1kHz
1 detailsSize & weight
- Dimensions
- 1.85 inch H x 4.6 inch W x 4.5 inch D
1 detailsIn the box
- Phono EQ Standard
- Conforms to RIAA Curve
5 detailsOther
- Maximum Gain
- 45dB @1KHz
- In Out Connections
- RCA
- Filter Type Response
- Switchable, Low Cut, -3dB @ 22Hz
- Hum and Noise
- > 90dB below clipping
- Total Harmonic Distortion
- .01% Typical @ 1kHz
