Detail 01
Passive design
No power or battery needed. Works anywhere, but the transformer costs you a little signal level.

Independent shopping perspective
Passive DI box that converts an instrument-level unbalanced signal to balanced XLR for long cable runs into a mixer or interface.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
No power or battery needed. Works anywhere, but the transformer costs you a little signal level.
Detail 02
Breaks the ground path between stage and console, which is what kills buzz on long runs.
Detail 03
Balanced output rejects noise picked up along the cable, so length stops mattering much.
Detail 04
Entry pricing for a utility box you will own for years and rarely think about.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. It is passive, so it runs entirely off the signal passing through it. Phantom power on the mixer channel will not harm it, but it is not required.
Yes. Bass into a mixer or interface is the most common use for a DI like this.
Passive works well with strong signals: basses with hot pickups, keyboards, amp outputs. Active DIs suit weak, high-impedance sources that need a gain boost.
It can. Isolating the ground between your rig and the console removes the loop that usually causes hum on stage.