Detail 01
10 inputs
Accommodates up to 10 input sources.
Product detailSKU #1500000374034
YamahaMG10X CV 10-Input Stereo Mixer With Effects
Sale
1/4
Independent shopping perspective
The Korena take
Yamaha's MG10X CV is a compact 10-input stereo mixer with a balanced stereo output and rotary controls that reduce its footprint where space is tight. It accepts XLR, 1/4-inch phone, and RCA-type pin-jack inputs, with XLR and phone outputs for connection flexibility. Four D-Pre discrete Class-A mic preamps, one AUX send including FX, 24 SPX effect programs, and two single-knob compression channels put core mixing tools into a steel-chassis format. A footswitch input can mute the effect hands-free.
Strong match
Who this is for
- Onstage mixes where compact placement matters and hands-free effect muting is useful.
- Connecting a mix of XLR, 1/4-inch phone, and RCA-type pin-jack sources.
Consider the trade-offs
When to look elsewhere
- Setups requiring more than 10 inputs.
- Mixing workflows that require faders rather than rotary controls.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
One AUX send including FX
Provides one AUX bus for the built-in effect.
Detail 03
24 SPX programs
The built-in SPX effect offers 24 preset programs.
Detail 04
Two single-knob compression channels
Compression is available on two channels.
Detail 05
9.6 x 2.8 x 11.6 inches; 4.63 lb.
Its compact dimensions and weight suit space-conscious placement.
Final check
Know before you order
- 01The MG10X CV uses rotary controls instead of faders.
- 02A PA-10 power adapter is included.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many inputs does the MG10X CV accommodate?
It can accommodate up to 10 inputs.
02Can I mute the built-in effect without using my hands?
Yes. A footswitch input allows hands-free effect muting.
03What types of inputs does it accept?
It accepts XLR, 1/4-inch phone, and RCA-type pin-jack inputs.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
7 detailsConnections & power
- Phantom Power Voltage
- +48V
- Residual Input Noise
- -102dBu (STEREO OUT, STEREO master knob set to min)
- Frequency Response Input to Stereo Out
- +0.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
- Power Requirements
- PA-10 power adapter (included)
- Power Consumption
- 22.9W
- Output Level
- 0dB to 7dB
- Total Harmonic Distortion Thd N Input to Stereo Out
- 0.02 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
3 detailsSize & weight
- Net Weight
- 4.63 lb.
- Dimensions Wxhxd
- 9.6 inch x 2.8 inch x 11.6 inch
- Weight
- 4.63
20 detailsOther
- Monitor Out
- 1
- Hpf Mono Mono Stereo
- 80Hz, 12dB/oct (mono)
- Phones
- 1
- Mid
- Gain: +15dB/-15dB, frequency: mono 250Hz–5kHz peaking, stereo 2.5kHz peaking
- Spx Algorithm
- 24 programs
- Low
- Gain: +15dB/-15dB, frequency: 100Hz shelving
- Pad Mono
- 26dB
- Group
- 0
- Release Time
- Approx. 300 msec
- Crosstalk 1khz
- -78dB
- Aux Send
- 1 (incl. FX)
- Pre Monitor Level Meter
- 2 x 7 segment LED meter [PEAK, +10, +6, 0, -6, -10, -20dB]
- Stereo Line
- 3
- Group Out
- 0
- Mono Mic Line
- 4
- Mono Stereo Mic Line
- 0
- Stereo
- 1
- Attack Time
- Approx. 25 msec
- Stereo Out
- 2
- Ratio
- 1:1 to 4:1
