Detail 01
12 inputs
Accommodates up to 12 input sources.
Product detailSKU #1500000374035
YamahaMG12X CV 12-Input 4-Bus Mixer With Effects
Sale
1/4
Independent shopping perspective
The Korena take
The MG12X CV brings 12-input mixing, a balanced stereo output, and fader control to a steel-chassis Yamaha mixer. Its two AUX sends include the built-in SPX effect path and a separate monitoring path, while four channels offer single-knob compression. D-Pre discrete Class-A microphone preamps, 24 SPX programs, and XLR, 1/4-inch phone, and RCA-type pin-jack inputs cover a varied source list. Illuminated channel on/off switches make channel status easier to see, and the effects can be muted by footswitch.
Strong match
Who this is for
- Live mixing where faders and illuminated channel switches make channel status easy to see.
- Using one AUX path for the built-in effect and another for monitoring.
- Rack-based installations using Yamaha's optional RK-MG12 rackmount kit.
Consider the trade-offs
When to look elsewhere
- Installations needing rackmount hardware included with the mixer.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Two AUX sends including FX
One AUX path serves the built-in effect and another is available for monitoring.
Detail 03
24 SPX programs
The built-in effect section provides 24 programs.
Detail 04
Four single-knob compression channels
Compression is available on four channels.
Detail 05
2 group outputs
The mixer provides two group outputs.
Detail 06
12.1 x 4.6 x 16.6 inches; 9.3 lb.
These are the mixer's stated dimensions and weight.
Final check
Know before you order
- 01Rackmounting requires the optional RK-MG12 rackmount kit.
- 02A footswitch input is provided for hands-free effect muting.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the MG12X CV have a monitor AUX path?
Yes. Its two AUX busses include one for the built-in SPX effect and another for monitoring.
02Can it be rackmounted?
Yes, with Yamaha's optional RK-MG12 rackmount kit.
03How many compression channels are available?
Four channels have single-knob compression.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsConnections & power
- Residual Input Noise
- -102dBu (STEREO OUT, STEREO master fader set to min)
- Frequency Response Input to Stereo Out
- +.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
- Power Requirements
- AC 100–240V, 50/60Hz
- Power Consumption
- 22W
- Output Level
- 0dB to 7dB
- Total Harmonic Distortion Thd N Input to Stereo Out
- 0.03 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
3 detailsSize & weight
- Net Weight
- 9.3 lb.
- Dimensions Wxhxd
- 12.1 inch x 4.6 inch x 16.6 inch
- Weight
- 9.3
21 detailsOther
- Monitor Out
- 1
- Hpf Mono Mono Stereo
- 80Hz, 12dB/oct (mono/stereo: MIC only)
- Phones
- 1
- Mid
- Gain: +15dB/-15dB, frequency: 2.5kHz peaking
- High
- Gain: +15dB/-15dB, frequency: 10kHz shelving
- Spx Algorithm
- 24 programs
- Low
- Gain: +15dB/-15dB, frequency: 100Hz shelving
- Pad Mono
- 26dB
- Group
- 2
- Release Time
- Approx. 300 msec
- Crosstalk 1khz
- -78dB
- Aux Send
- 2 (incl. FX)
- Pre Monitor Level Meter
- 2 x 12 segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB]
- Stereo Line
- 2
- Group Out
- 2
- Mono Mic Line
- 4
- Mono Stereo Mic Line
- 2
- Stereo
- 1
- Attack Time
- Approx. 25 msec
- Stereo Out
- 2
- Ratio
- 1:1 to 4:1
