Korena
Product detailSKU #1391442168054

YamahaMG10 10-Channel Mixer

Yamaha logo
Yamaha MG10 10-Channel Mixer
1/4

Independent shopping perspective

The Korena take

The MG10 is a ten-channel mixer organized around four mono MIC/LINE channels and three stereo LINE channels. It suits installed, recording, and live music use where a single stereo bus and AUX [FX] bus provide the required routing. Mono-channel controls include +48V phantom power, a 26 dB PAD, one-knob compression, three-band EQ, and an 80 Hz high-pass filter. Two 12-segment LED meters make the stereo output level easy to monitor while making adjustments.

Yamaha MG10 10-Channel Mixer product detail
Product studyYamaha MG10 10-Channel Mixer
Yamaha MG10 10-Channel Mixer alternate view
Alternate view

Strong match

Who this is for

  • Installed, recording, or live music setups using four mono and three stereo line channels.
  • Mixes that need a single stereo bus and one AUX [FX] bus.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Yamaha MG10 10-Channel Mixer construction detail

Detail 01

One-knob compressor

Its threshold, ratio, output level, attack time, and release time are specified for the compressor.

Detail 02

26 dB mono PAD and +48V phantom power

Provides dedicated input-level and condenser-microphone controls on mono channels.

Detail 03

80 Hz high-pass filter, 12 dB/octave

Available on mono channels as part of the channel controls.

Detail 04

Two 12-segment LED meters

Displays stereo output level from -30 dB through PEAK.

Final check

Know before you order

  1. 01The mixer has one stereo bus and one AUX [FX] bus.
  2. 02Its input layout is four mono MIC/LINE channels plus three stereo LINE channels.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How many channels does the MG10 provide?

It provides four mono MIC/LINE channels and three stereo LINE channels, for ten channels total.

02Does the MG10 have phantom power?

Yes. It has +48V phantom power.

03What output metering does it use?

It has two 12-segment LED level meters, marked from -30 dB through PEAK.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsConnections & power
Output Channels
STEREO OUT: 2
Phantom Power
+48V
Input Channels
4 Mono [MIC/LINE], stereo [LINE]: 3
Output Level
0dB to 7dB
17 detailsOther
Bus
Stereo: 1, AUX [FX]: 1
Comp
1-knob compressor
EQ High
Gain: +15dB/–15dB, Frequency: 10kHz shelving
Monitor Out
1
Aux Send
1
Peak LED
LED turns on when post EQ signal reaches 3dB below clipping
Phones
1
Threshold
+22 dBu to -8 dBu
EQ Mid
Gain: +15dB/-15dB, Frequency: 2.5kHz peaking
Level Meter
2 x 12-segment LED meter [PEAK, +10, +6, +3, 0, –3, –6, –10, –20, –25, –30dB]
Pad
26dB (Mono)
Attack Time
approx. 25 msec
Onboard Processors
SPX algorithm: 24 programs
Hpf
80Hz, 12dB/oct (Mono)
Release Time
approx. 300 msec
Ratio
1:1 to 4:1
EQ Low
Gain: +15dB/-15dB, Frequency: 100Hz shelving

Worth comparing

More from Yamaha