Detail 01
Balanced male XLR output / +4 dBu
Connects the receiver to the audio system through a balanced XLR output.
Product detailSKU #1500000403459
XviveP3 Bluetooth Audio Receiver for Mono Audio
1/6
Independent shopping perspective
The Korena take
Xvive's P3 is a compact Bluetooth receiver for sending mono audio from a smartphone or laptop into mixers and active PA/DJ systems through its balanced male XLR output. It supports Bluetooth 5.1, A2DP and AVRCP, plus SBC and AAC codecs. The internal rechargeable battery is rated for up to six hours, and USB-C charging from a 5V source takes up to two hours. For event playback, the advertised range reaches 100 feet when there is clear line of sight without obstacles.
Strong match
Who this is for
- Sending mono Bluetooth playback from a phone or laptop into a mixer or active PA/DJ system.
- Parties, events, and weddings where the receiver can maintain a clear line-of-sight Bluetooth connection.
- Portable playback setups that benefit from a rechargeable receiver with balanced male XLR output.
Consider the trade-offs
When to look elsewhere
- Stereo audio routing; the P3 is supplied as a receiver for mono audio.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Up to 100 ft (30.5 m) Bluetooth range
That range applies with line of sight and no obstacles.
Detail 03
Built-in 300 mAh lithium-ion battery
Rated for up to six hours of operation.
Detail 04
USB Type-C, 5V 500 mA charging
Charges from a 5V USB power source in up to two hours.
Detail 05
SBC and AAC codecs
These are the supported Bluetooth audio codecs.
Final check
Know before you order
- 01Plan for a 5V USB power source to recharge the internal battery.
- 02The 100-foot range specification assumes line of sight without obstacles.
- 03Confirm that mono audio and a balanced male XLR output suit the intended system.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I connect a phone or laptop to the P3?
Yes. It connects smartphones and laptops to audio broadcast systems via Bluetooth.
02How long does the battery run?
The built-in rechargeable battery is rated for up to six hours of operation.
03How does it charge?
Use its USB Type-C port with a 5V, 500 mA USB power source. Recharging takes up to two hours.
04Is the XLR output balanced?
Yes. The P3 has a balanced male XLR output.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- A2dp Frequency Response
- 20Hz–20kHz (ref 1kHz, ±3dB)
- Frequency Band
- 2402 to 2480MHz
1 detailsBody & build
- Color
- Blue
5 detailsConnections & power
- Rechargeable Battery
- Built-in lithium-ion 300 mAh
- XLR Output
- XLR male, balanced
- Output Level
- +4 dBu
- Battery Life
- Up to 6 hours
- Supported Bluetooth Codecs
- SBC, AAC
2 detailsSize & weight
- Weight
- 0.12
- Dimensions
- 24 x 24 x 116.5 mm
5 detailsOther
- Bluetooth Proles
- 5.1, A2DP, AVRCP
- Bluetooth Range
- Up to 100' (30.5 m)
- USB Charging
- Type-C 5V, 500 mA
- Recharging Time
- Up to 2 hours
- Dac Resolution
- 16-bit, 48kHz
