Detail 01
Balanced male XLR output
Connects at the receiver with a balanced XLR output.
Product detailSKU #1500000403460
XviveP3 Bluetooth Audio Receiver 2-Pack for Dual Mono or Stereo Audio
1/7
Independent shopping perspective
The Korena take
Put Bluetooth playback into a mixer, active PA, or active DJ system without tying up the source device at the audio rig. This two-receiver set can run as dual mono, or link both P3 units to receive a stereo signal. Each receiver provides a balanced male XLR output and runs for up to six hours from its internal rechargeable battery. For event playback, the line-of-sight Bluetooth range reaches up to 100 feet.
Strong match
Who this is for
- Sending music or other audio from a smartphone or laptop to an active PA system.
- Stereo playback setups that can link two P3 receivers.
- Parties, events, and weddings where the source device needs room to move.
Consider the trade-offs
When to look elsewhere
- Bluetooth placements beyond the stated 100-foot line-of-sight range or obstructed signal paths.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Built-in 300 mAh lithium-ion battery
Delivers up to six hours of operation per charge.
Detail 03
Type-C 5V, 500 mA charging
Charges from a 5V USB power source; recharging takes up to two hours.
Detail 04
Charging and battery-status LEDs
Shows charging completion and signals when battery power is getting low.
Detail 05
20 Hz–20 kHz A2DP frequency response
Covers the specified A2DP audio-response range.
Final check
Know before you order
- 01For stereo reception, the two included P3 units must be linked.
- 02The stated 100-foot Bluetooth range applies to line-of-sight operation without obstacles.
- 03Have access to a 5V USB power source for Type-C charging.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the two receivers handle stereo audio?
Yes. Two P3 receivers can be linked to receive a stereo signal.
02How long does the battery run?
Each receiver provides up to six hours of operation from its built-in rechargeable battery.
03How is it charged?
Use its Type-C port with any 5V USB power source. Recharging takes up to two hours.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- A2dp Frequency Response
- 20Hz–20kHz (ref 1kHz, ±3dB)
- Frequency Band
- 2402 to 2480MHz
1 detailsBody & build
- Color
- Blue
5 detailsConnections & power
- Rechargeable Battery
- Built-in lithium-ion 300 mAh
- XLR Output
- XLR male, balanced
- Output Level
- +4dBu
- Battery Life
- Up to 6 hours
- Supported Bluetooth Codecs
- SBC, AAC
2 detailsSize & weight
- Weight
- 0.12
- Dimensions
- 24 x 24 x 116.5 mm
5 detailsOther
- Bluetooth Pro Les
- 5.1, A2DP, AVRCP
- Bluetooth Range
- Up to 100' (30.5 m)
- USB Charging
- Type-C 5V, 500 mA
- Recharging Time
- Up to 2 hours
- Dac Resolution
- 16-bit, 48kHz
