Detail 01
RJ11 remote monitoring and control
Supports remote control and system monitoring from the receiver’s rear panel.
Product detailSKU #1500000482589
AudixNovacore NCR1 Wireless Receiver
Independent shopping perspective
The Korena take
Built as the receiving end of an Audix Novacore wireless system, the NCR1 puts single-channel digital reception in an all-metal half-rack format. Its high-visibility display shows real-time RF and audio metering, with rear-panel RJ11 access for remote monitoring and control. The receiver provides 24-bit audio, under-3ms latency, AES-256 encryption, IR sync, and a variable-level XLR output. Dante AoIP support gives it a direct path into networked audio workflows, while the scalable multichannel architecture suits larger coordinated systems.
Strong match
Who this is for
- Building a coordinated Novacore multichannel wireless rig with remote monitoring and secure digital transmission.
- Integrating a Novacore wireless channel into an XLR input or Dante AoIP network-audio setup.
Consider the trade-offs
When to look elsewhere
- Use outside the Audix Novacore wireless-system platform.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Variable-level XLR output
Lets you set the level at the receiver’s XLR audio output.
Detail 03
48MHz tuning range
Provides frequency-selection range within its 494MHz–542MHz operating band.
Detail 04
Dante AoIP
Adds network-audio integration alongside the XLR output.
Final check
Know before you order
- 01Confirm that your wireless setup uses the Audix Novacore platform.
- 02Plan for the receiver’s 494MHz–542MHz operating range.
- 03Choose whether your audio path will use XLR output, Dante AoIP, or both.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What wireless systems work with the NCR1?
It is designed for Audix Novacore wireless systems.
02Does the NCR1 provide network audio?
Yes. It supports Dante AoIP network audio.
03How many wireless channels does this receiver handle?
The NCR1 is a single-channel digital wireless receiver.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Range
- 494MHz–542MHz
2 detailsPickups & controls
- Output Level Control
- Variable level switch
- Remote Control
- RJ11 remote monitoring and control
1 detailsBody & build
- Construction
- All-metal
1 detailsConnections & power
- Audio Output
- XLR
1 detailsSize & weight
- Bandwidth
- 50MHz
15 detailsOther
- Chassis Format
- Half-rack
- Compatible Systems
- Audix Novacore wireless systems
- Rf Front End
- High-performance with image rejection
- Audio Resolution
- 24-bit
- Display
- High-visibility display
- Tuning Range
- 48MHz
- Wireless Operation
- Wideband UHF digital
- Product Type
- Single-channel digital wireless receiver
- System Architecture
- Scalable multichannel
- Encryption
- AES-256
- Metering
- Real-time RF and audio metering
- Series
- Novacore
- Synchronization
- IR sync
- Model
- NCR1
- Network Audio
- Dante AoIP
