Detail 01
1/2 size
Cut for a half-size violin. On a larger instrument it won't reach pitch correctly or hold tension properly.

Independent shopping perspective
A single wound E string with a ball end, sized for a half-size violin. For replacing a broken or dead E on a student instrument.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Cut for a half-size violin. On a larger instrument it won't reach pitch correctly or hold tension properly.
Detail 02
A wound E is less shrill and less prone to whistling under the bow than a plain steel E.
Detail 03
The ball seats in a standard tailpiece slot or ball-end fine tuner. Loop-end adjusters won't hold it.
Detail 04
Replace only the E and leave the rest alone, which is usually how E strings get changed.
Detail 05
Part of Thomastik's Dominant range, so it matches if you later replace the other three with the same line.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
A 1/2 size violin. It won't work correctly on 3/4 or full-size instruments.
Ball end. It drops into a standard tailpiece slot or a ball-end fine tuner.
A wound E has a covering over the core. It tends to sound less piercing and whistles less under the bow, at some cost in brightness.
No. This is the E string only.