Detail 01
3/4 size
Cut for a three-quarter violin's shorter string length. A 4/4 string is too long to seat correctly.

Independent shopping perspective
Single wound E string for a 3/4 violin, ball end. Replaces a broken or worn E on a three-quarter size instrument.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Cut for a three-quarter violin's shorter string length. A 4/4 string is too long to seat correctly.
Detail 02
Wrapped rather than plain steel. Softer and less shrill under the bow, at the cost of some brightness and projection.
Detail 03
The anchor at the tailpiece end. Fine adjusters and tailpieces are cut for either ball or loop, not both.
Detail 04
The highest, thinnest string. It breaks more than the others, which is why singles are worth stocking.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. This is the E string alone. The G, D, and A would each need to be bought separately.
A wound E is wrapped in metal, giving a softer, less piercing tone. A plain steel E is brighter and projects more.
No. It is cut to 3/4 length and will be too short to string and tune properly on a full-size violin.
It is the thinnest string under the most tension. Sharp edges at the bridge or nut groove are the usual cause — have them checked.