Detail 01
Omnidirectional pre-polarized electret-condenser capsule
The microphone captures measurement sound from all directions.
Product detailSKU #1500000374895
SonarworksSoundID Reference Measurement Microphone
1/8
Independent shopping perspective
The Korena take
The SoundID Reference Measurement Microphone is an XLR measurement mic built for SoundID Reference calibration work. Its supplied SoundID Reference calibration profile is custom-tailored, and the microphone was measured against an ANSI-certified microphone for precision in that workflow. An omnidirectional, pre-polarized electret-condenser capsule captures measurement sound from all directions. A second calibration profile is supplied for use with third-party systems, giving the mic a separate path beyond SoundID Reference.
Strong match
Who this is for
- SoundID Reference users calibrating a monitoring system with an XLR measurement microphone.
- Measurement workflows that need the supplied SoundID Reference calibration profile.
- Third-party calibration systems using the microphone’s second supplied profile.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Two supplied calibration profiles
One profile is for SoundID Reference and the other is for third-party systems.
Detail 03
20Hz–20kHz with supplied calibration profile
The listed response range applies with the supplied calibration profile.
Detail 04
132dB SPL maximum
The microphone’s listed maximum sound-pressure level.
Final check
Know before you order
- 01Use an XLR connection.
- 02Select the SoundID Reference profile or the separate third-party-system profile for the intended calibration workflow.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this microphone made for SoundID Reference?
Yes. It is an XLR measurement microphone designed for SoundID Reference and includes a custom-tailored profile for it.
02Can it be used with a third-party system?
Yes. A second calibration profile is included for third-party systems.
03What pickup pattern does it use?
It has an omnidirectional polar pattern.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSize & weight
- Bit depth
- 64-bit
19 detailsOther
- Category Source
- detail
- Self noise
- 24dB
- S/N ratio
- 70dB
- OS Requirements Mac
- macOS 10.12 or later
- OS Requirements PC
- Windows 8 or later
- Hardware requirements PC
- Intel Core 2 Duo / AMD Athlon 64 X2 or higher, 4GB RAM minimum
- Maximum SPL
- 132dB SPL
- Platform
- Mac, PC
- Dynamic range
- 106dB
- Korena Special
- false
- Dimensions (WxHxD)
- 7.56" (19.2 cm)
- Weight
- 0.14 lbs (0.06 kg)
- Software type
- Audio calibration
- Sensitivity
- Rated at -37dB/Pa (14 mV)
- Format
- AAX, VST, AU
- Tier
- new
- Hardware requirements Mac
- Intel Core 2 Duo or higher, 4GB RAM minimum
- Frequency response
- 20Hz-20kHz with supplied calibration profile
- Source Id
- site51500000374895
Complete your setup
Worth comparing
1 of 12
